Verifiable specification comparison · Daheng Imaging

Daheng Imaging VE2S-042-121GC-P alternative from Hikrobot

Hikrobot replacement options for the Daheng Imaging VE2S-042-121GC-P: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.

Comparison with Hikrobot models

Hikrobot MV-CB004-10GC-S matches the VE2S-042-121GC-P on resolution, frame rate and interface.

Check before ordering:
  • Software, SDK, connectors, mount and dimensions require a separate engineering check.

To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.

Continue the search
MV-CB004-10GC-S
No loss of resolution, frame rate, or line rate
The compared resolution values and the frame or line rate are no lower than the original model's; pixel size matches.
Specification comparison
The table scrolls to the right →
SpecificationCompetitorOur modelDifference
Resolution 720 × 540 px 720 × 540 px Matches
Pixel size 6.9 × 6.9 µm 6.9 × 6.9 µm Matches
Sensor Sony IMX297 Sony IMX297 Matches
Shutter type Global Global Matches
Mono/color Color Color Matches
Spectral range Visible range Visible range Matches
Frame rate 121.8 fps 125.2 fps Δ +3.4 (+2.79 %)
Interface GigE · 1 Gbit/s · RJ45 · PoE GigE · 1 Gbit/s · PoE Confirm from the datasheet
Lens mount C C, M12 · 12 mm Matches
Other Daheng Imaging models with replacement options
VE2S-042-121GC-P specifications
The table scrolls to the right →
SpecificationCompetitor value
Resolution 720 × 540 px
Pixel size 6.9 × 6.9 µm
Sensor Sony IMX297
Shutter type Global
Mono/color Color
Spectral range Visible range
Frame rate 121.8 fps
Interface GigE · 1 Gbit/s · RJ45 · PoE
Lens mount C
Specification sources
Manually checked: 2026-09-08
The spectral range is taken as visible: the manufacturer lists no variant of this model outside the visible range.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.