Hikrobot replacement options for the Omron V440-F: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
No confirmed drop-in replacement. The closest Hikrobot models differ in mount, pixel size and resolution. Each difference is listed below.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The hardware parameters are compared. This comparison does not establish suitability for your code and reading conditions.
Trade-offs to settle before you choose:
Reader selection depends on supported code types, reading distance and depth, decoding speed, and illumination. This comparison has no data for those criteria for either device, so they were not assessed. The hardware comparison below is for reference only and does not establish suitability.
Frame height: 2048 instead of 2056 px (-0.39 %).
Frame width: 2432 instead of 2464 px (-1.3 %).
The sensor part number is not confirmed in this comparison: we compare by resolution, pixel size, frame or line rate and interface.
With the same lens and working distance, on the full frame, the field of view changes: -1.3 % in width, -0.39 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
The hardware parameters are compared. This comparison does not establish suitability for your code and reading conditions.
Trade-offs to settle before you choose:
Reader selection depends on supported code types, reading distance and depth, decoding speed, and illumination. This comparison has no data for those criteria for either device, so they were not assessed. The hardware comparison below is for reference only and does not establish suitability.
The lens mount differs: check the fit and the flange distance of your current lens.
Pixel size, X: 3.2 instead of 3.45 µm (-7.25 %); the field of view will change with the same lens.
Pixel size, Y: 3.2 instead of 3.45 µm (-7.25 %); the field of view will change with the same lens.
Frame height: 2048 instead of 2056 px (-0.39 %).
The sensor part number is not confirmed in this comparison: we compare by resolution, pixel size, frame or line rate and interface.
With the same lens and working distance, on the full frame, the field of view changes: -3.63 % in width, -7.61 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.