Teledyne FLIR ORX-10GS-123S6M-C alternative from Hikrobot
Hikrobot replacement options for the Teledyne FLIR ORX-10GS-123S6M-C: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
Hikrobot MV-CH120-15TM-M58S-NF matches the ORX-10GS-123S6M-C on resolution, frame rate and interface.
Check before ordering:
Software, SDK, connectors, mount and dimensions require a separate engineering check.
The lens mount differs: check the fit and the flange distance of your current lens.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The compared resolution values and the frame or line rate are no lower than the original model's; pixel size matches.
The sensor part number is not confirmed in this comparison: we compare by resolution, pixel size, frame or line rate and interface.
With the same lens and working distance, on the full frame, the field of view changes: 0 % in width, +2.4 % in height. A larger image circle is required — check that the existing lens covers the active area.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Pixel size, X: 3.4 instead of 3.45 µm (-1.45 %); the field of view will change with the same lens.
Pixel size, Y: 3.4 instead of 3.45 µm (-1.45 %); the field of view will change with the same lens.
With the same lens and working distance, on the full frame, the field of view changes: -1.45 % in width, +0.92 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.