Verifiable specification comparison · Basler

Basler a2A4096-9gcIP67 alternative from Hikrobot

Hikrobot replacement options for the Basler a2A4096-9gcIP67: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.

Comparison with Hikrobot models

Hikrobot MV-CH123-10GC matches the a2A4096-9gcIP67 on resolution, frame rate and interface.

Check before ordering:
  • Connector: RJ45 instead of M12 X-coded 8-pin receptacle (GigE) — the system has to be checked.
  • Software, SDK, connectors, mount and dimensions require a separate engineering check.

To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.

Continue the search
MV-CH123-10GC
Trade-off — needs agreement
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
  • Connector: RJ45 instead of M12 X-coded 8-pin receptacle (GigE) — the system has to be checked.
Specification comparison
The table scrolls to the right →
SpecificationCompetitorOur modelDifference
Resolution 4096 × 3000 px 4096 × 3000 px Matches
Pixel size 2.74 × 2.74 µm 2.74 × 2.74 µm Matches
Sensor Sony IMX545 Sony IMX545 Matches
Shutter type Global Global Matches
Mono/color Color Color Matches
Spectral range Visible range Visible range Matches
Frame rate 9.5 fps 9.5 fps Matches
Interface GigE · 1 Gbit/s · M12 X-coded 8-pin receptacle (GigE) · PoE GigE · 1 Gbit/s · RJ45 · PoE Trade-off
Lens mount C C Matches
Other Basler models with replacement options
a2A4096-9gcIP67 specifications
The table scrolls to the right →
SpecificationCompetitor value
Resolution 4096 × 3000 px
Pixel size 2.74 × 2.74 µm
Sensor Sony IMX545
Shutter type Global
Mono/color Color
Spectral range Visible range
Frame rate 9.5 fps
Interface GigE · 1 Gbit/s · M12 X-coded 8-pin receptacle (GigE) · PoE
Lens mount C
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.