Daheng Imaging MER2-1070-10GM-P alternative from Hikrobot
Hikrobot replacement options for the Daheng Imaging MER2-1070-10GM-P: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
No confirmed drop-in replacement. The closest Hikrobot models differ in frame rate, interface, mount, pixel size and sensor. Each difference is listed below.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
The lens mount differs: check the fit and the flange distance of your current lens.
Pixel size, X: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
Pixel size, Y: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
With the same lens and working distance, on the full frame, the field of view changes: +16.09 % in width, +22.39 % in height. A larger image circle is required — check that the existing lens covers the active area.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Frame rate: 9.7 instead of 10 fps (-3 %).
The lens mount differs: check the fit and the flange distance of your current lens.
Pixel size, X: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
Pixel size, Y: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
With the same lens and working distance, on the full frame, the field of view changes: +16.09 % in width, +22.39 % in height. A larger image circle is required — check that the existing lens covers the active area.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
PoE power: optional instead of yes — the system has to be checked.
Frame rate: 9.7 instead of 10 fps (-3 %).
The lens mount differs: check the fit and the flange distance of your current lens.
Pixel size, X: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
Pixel size, Y: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
With the same lens and working distance, on the full frame, the field of view changes: +16.09 % in width, +22.39 % in height. A larger image circle is required — check that the existing lens covers the active area.
Why it is not a drop-in replacement
The table scrolls to the right →
Parameter
MER2-1070-10GM-P
MV-CU120-10GM V2.0
What it changes
Interface
GigE · 1 Gbit/s · RJ45 · PoE
GigE · 1 Gbit/s · RJ45 · PoE: optional
PoE power: optional instead of yes — the system has to be checked.
Frame rate
10 fps
9.7 fps
Frame rate: 9.7 instead of 10 fps (-3 %).
Lens mount
C, CS
C
The lens mount differs: check the fit and the flange distance of your current lens.
Pixel size
1.67 × 1.67 µm
1.85 × 1.85 µm
Pixel size, X: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
Pixel size
1.67 × 1.67 µm
1.85 × 1.85 µm
Pixel size, Y: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Frame rate: 9.6 instead of 10 fps (-4 %).
The lens mount differs: check the fit and the flange distance of your current lens.
Pixel size, X: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
Pixel size, Y: 1.85 instead of 1.67 µm (+10.78 %); the field of view will change with the same lens.
With the same lens and working distance, on the full frame, the field of view changes: +16.09 % in width, +22.39 % in height. A larger image circle is required — check that the existing lens covers the active area.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.