IDS Imaging U3-3892ACP-M Rev.1.2 alternative from Hikrobot
Hikrobot replacement options for the IDS Imaging U3-3892ACP-M Rev.1.2: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
Hikrobot MV-CB120-10UM-B V4.0 matches the U3-3892ACP-M Rev.1.2 on resolution, frame rate and interface.
Check before ordering:
Frame rate: 30 instead of 33.2 fps (-9.64 %).
Software, SDK, connectors, mount and dimensions require a separate engineering check.
With the same lens and working distance, on the full frame, the field of view changes: +0.8 % in width, +1.2 % in height. A larger image circle is required — check that the existing lens covers the active area.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Frame rate: 30 instead of 33.2 fps (-9.64 %).
With the same lens and working distance, on the full frame, the field of view changes: +0.8 % in width, +1.2 % in height. A larger image circle is required — check that the existing lens covers the active area.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Frame rate: 30 instead of 33.2 fps (-9.64 %).
With the same lens and working distance, on the full frame, the field of view changes: +0.8 % in width, +1.2 % in height. A larger image circle is required — check that the existing lens covers the active area.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Frame rate: 30 instead of 33.2 fps (-9.64 %).
With the same lens and working distance, on the full frame, the field of view changes: +0.8 % in width, +1.2 % in height. A larger image circle is required — check that the existing lens covers the active area.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.