3D laser profile sensor · DP2000 series Laser Profiler
Hikrobot MV-DP2240
- Lead time
- from 5 days
- Warranty
- 36 months
Large-relief measurement and execution choice
A 200 mm Z range at a 245 mm reference distance makes MV-DP2240 a large-envelope profile sensor. Its X field expands from 100 mm near through 150 mm at reference to 200 mm far, and every profile has 3200 points. In high-frame-rate mode the scan rate runs from 1.7 to 23.9 kHz.
The measurement volume supports height, shape and edge inspection on parts whose depth cannot fit the smaller DP ranges. Software or differential-encoder hardware triggering can align profiles with motion. Profile, depth and brightness outputs travel over Gigabit Ethernet, and the 12-pin M12 connection combines the 24 VDC supply with differential inputs, output and RS-232 on the 01P execution.
MV-DP2240 extends well beyond MV-DP2120's 80 mm Z range and 74.2 mm reference field, while MV-DP2120 lists 1.48 µm repeatability against 1.73 µm here. MV-DP3300 offers a similar 210 mm Z range, a wider 183 mm reference field and rates to 46.7 kHz. Select MV-DP2240 for the 245 mm standoff and 200 mm envelope; select MV-DP3300 when rate and field width lead.
Overview
A DP2000 series laser profiler — the base class: the sensor projects a laser line across the part and measures height at every point of the section, up to 3200 points per profile.
Working distance 245 mm, measurement range 200 mm.
Used where a profile is needed rather than a picture: weld bead control, adhesive bead height, gap and flush, warpage, parcel volume. Data goes to VM3D or 3DMVS, and to third-party software over a standard protocol.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | |
|---|---|---|
| MV-DP2240-01P | 306400441 | |
| MV-DP2240-03P | 306400442 |
Specifications
| Data interface | GigE (Fast Ethernet compatible) |
| 3D scan rate | 1700…23900 Hz @ high frame rate mode |
| Depth measurement range | 200 mm |
| Points per profile | 3200 |
| Reference distance | 245 mm |
| Reference field of view | 150 mm |
| Z resolution | 6.47…26.11 µm |
| Trigger mode | software, hardware, encoder |
| Laser safety class | 3R |
| Client software | 3DMVS, VM3D |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 2 inputs, opto-isolated, lines 0, 9; 2 inputs, differential, lines 3, 6; 1 output, differential, line 1 |
| Digital output count | 11 |
| Digital I/O connector | M12 12-pin |
| Power supply | 24 V |
| Power consumption | 15.2 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP67 |
| Working temperature | 0…45 °C |
| Storage temperature | -30…80 °C |
| Dimensions | 185.5×125.5×59 mm |
| Weight | 1450 g (approx.) |
| Far field of view | 200 mm |
| Near field of view | 100 mm |
| Operating environment | non-condensing1 |
| Output data type | profile, depth image, brightness image |
| Profile data interval | 31.2…67.7 µm |
| Port inventory | GigE (data)1 |
| Power supply connector | M12 12-pin |
| Recommended system CPU | Intel Core i51 |
| Required system CPU | Core i5 per manufacturer requirements1 |
| Part number | Z repeatability | Wavelength | Humidity | Z linearity | System memory required |
|---|---|---|---|---|---|
MV-DP2240-03PAll specifications
| 1.73 µm | 650 nm | 20…85 % | -0.01…0.01 % @ % of measurement range | ≥8 GB |
MV-DP2240-01PAll specifications
| 1.73 µm (average) | 405 nm | 20…85 % @ non-condensing | 0 ±0.01 % @ % of measurement range | 8 GB |
1 not stated for all variants
Documents
Selection and applications
Large-part height measurement through a 200 mm Z range. Contour capture across a 150 mm reference field. Encoder-triggered profile, depth and brightness acquisition.
Minimum kit: MV-DP2240, a Gigabit Ethernet cable, a 12-pin M12 power and I/O cable matched to the execution, a 24 VDC supply, and a 3DMVS, VM3D or third-party software host form the minimum acquisition kit.
Nearby in the range: MV-DP2120 — Prefer it for an 80 mm Z range and 1.48 µm repeatability at a shorter working distance; MV-DP3300 — Prefer it for a 210 mm Z range, 183 mm reference field and rates up to 46.7 kHz.
Cables and accessories for this model
Compatibility per manufacturer data.
- Other
- 3D accessories
FAQ
What measurement volume does MV-DP2240 cover around its reference plane?
The Z range is 200 mm around a 245 mm reference distance. Its X field spans 100 mm near, 150 mm at reference and 200 mm far, providing a strongly expanding lateral envelope that must be considered when placing the part and fixtures.
What scan rate is stated for the MV-DP2240 executions?
Both 01P and 03P list a 1.7 to 23.9 kHz scan rate in high-frame-rate mode. They differ in laser wavelength: 405 nm for 01P and 650 nm for 03P.
Which 3D outputs and triggers are available from MV-DP2240?
The sensor outputs profile data, depth images and brightness images. It supports software triggering and hardware triggering from a differential encoder, enabling profile positions to be coordinated with motion before the results are sent over Ethernet.
What power and I/O arrangement is listed for MV-DP2240-01P?
The 01P execution uses a 12-pin M12 power and I/O interface with three differential inputs, one differential output and one RS-232 channel. Supply is 24 VDC; listed consumption is 15.2 W for both 01P and 03P.
What enclosure and ambient limits apply to both MV-DP2240 variants?
Both listed executions use a 185.5 × 125.5 × 59 mm IP67 housing and weigh approximately 1450 g. The operating interval is 0 to 45 °C, storage is -30 to 80 °C, and humidity is 20 to 85% RH without condensation.
What software choices can handle measurements from MV-DP2240?
3DMVS, VM3D and third-party software are named. Profile data, depth images and brightness images use the 1000 Mbit/s Gigabit Ethernet connection, which is compatible with 100 Mbit/s Fast Ethernet when the output load permits.