Hikrobot MV-CA023-10GC

Discontinued

The manufacturer has discontinued this model.

Last buy date at the manufacturer: 2025-12-30.

Manufacturer-listed replacement:

Applications and range position

Imaging in color at 1920 × 1200 gives MV-CA023-10GC its spatial profile, paired with the Sony IMX249 CMOS sensor, a global shutter and 41 fps acquisition at full resolution. The 1/1.2-inch sensor uses 5.86 µm pixels, while the Gigabit Ethernet interface also operates with Fast Ethernet. This combination suits inspection stations that need color information, synchronized capture and a network connection.

The global shutter supports capture of moving components without the line-by-line timing of a rolling shutter. A 34 µs to 10 sec exposure range covers short synchronized exposures and longer acquisitions, while the 6-pin Hirose connection provides an opto-isolated input, an opto-isolated output and one bidirectional non-isolated I/O line. PoE can combine power and data on the Ethernet run.

MV-CA023-10GM keeps the same Sony IMX249, 1920 × 1200 resolution and 41 fps network interface, but its recorded power consumption is 2.9 W rather than 3.1 W. MV-CA023-10UC provides color capture through USB 3.0 at 40 fps in a 29 × 29 × 30 mm body; choose it for USB attachment and shorter depth. MV-CA023-10UM records mono output over USB 3.0 at 41 fps. Retain MV-CA023-10GC for color capture through Gigabit Ethernet with PoE.

Documents

Selection and applications

Verification of color on moving components. Triggered position and presence inspection. Networked capture at 1920 × 1200.

Minimum kit: The minimum setup is MV-CA023-10GC, a C-mount lens, a Gigabit Ethernet cable, and either PoE or a 12 V DC supply.

Nearby in the range: MV-CA023-10GM — Choose it for the same 1920 × 1200, 41 fps Gigabit Ethernet platform with 2.9 W recorded consumption; MV-CA023-10UC — Choose it for color capture over USB 3.0 in a 29 × 29 × 30 mm body; MV-CA023-10UM — Choose it for mono output, USB 3.0 and 41 fps at 1920 × 1200.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

Hirose 6-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What resolution and acquisition rate are available at full frame?

MV-CA023-10GC records 1920 × 1200 color images at up to 41 fps. Its Sony IMX249 CMOS sensor has a global shutter, a 1/1.2-inch optical format and 5.86 µm × 5.86 µm pixels.

Can MV-CA023-10GC receive power through its network connection?

Yes. The camera supports PoE over its Gigabit Ethernet connection and also accepts 12 V DC. Typical consumption is 3.1 W at 12 V DC, so the installation can use network power or the separate power and I/O connector.

Which trigger and output signals are available on the camera?

The 6-pin Hirose connector carries power and I/O. It provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O line for connection to a trigger source or an external device.

What exposure range does the global-shutter sensor provide?

Exposure can be set from 34 µs to 10 sec, with gain adjustable from 0 dB to 20 dB. The short end supports synchronized capture of moving parts, while the global shutter exposes the complete image at one time.

What environmental and mechanical limits apply to installation?

The housing measures 29 mm × 29 mm × 42 mm, weighs approximately 68 g and carries an IP30 rating with proper lens installation and wiring. Its stated working range is 0 °C to 50 °C at 20% RH to 80% RH without condensation.