Area camera · CB013 series
Hikrobot MV-CB013-A0UC-S
- Lead time
- from 5 days
- Warranty
- 36 months
Embedded color tasks and positioning
Color capture at 201 fps gives MV-CB013-A0UC-S its place in compact, high-cycle imaging. The CMOS camera records 1280 × 1024 with a global shutter on a 1/2-inch sensor and transfers the stream through USB 3.0. This execution carries an M12-mount for the lens; the camera measures 35 × 35 × 8.6 mm and weighs approximately 30 g.
This profile supports rapid colored-part sorting, assembly-state checks and label or marker detection when a 1280 × 1024 field contains the needed feature detail. The global shutter holds spatial relationships on a moving target, and two bidirectional non-isolated I/O lines allow the embedded controller to coordinate capture and illumination. USB 3.0 provides the camera power, with consumption stated as 2.8 W.
MV-CB013-A0UM-S matches the 1280 × 1024 resolution, 201 fps, USB interface and mount choices but returns monochrome data at a lower 1.6 W consumption. MV-CB016-10UC-C V4.0 raises color resolution to 1440 × 1080 but runs at 165.4 fps on a Sony IMX273. Select MV-CB013-A0UC-S when 201 fps and color are more important than the CB016 model's additional pixels.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/2″ |
| Sensor resolution | 1280×1024 px |
| Maximum frame rate | 201 fps @ resolution 1280×1024 px |
| Color mode | color |
| Lens mount | M12×0.5 |
| Data interface | USB 3.0 |
| Dimensions | 35×35×8.6 mm |
| Sensor technology | CMOS |
| Sensor model | HK |
| Pixel size | 4.8×4.8 µm |
| Dynamic range | 53 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 9…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…16 dB |
| Pixel format | Mono8, Mono10, Mono12, BayerGB8, BayerGB10, BayerGB10p, BayerGB12, BayerGB12p, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows XP (32/64-bit), Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit), macOS (64-bit) |
| Digital I/O lines | 2 bidirectional lines, non-isolated, lines 2, 5 |
| Power delivery | USB |
| Power consumption | 2.8 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…80 % @ non-condensing |
| Weight | 30 g (approx.) |
| Certification | CE, FCC, RoHS, KC |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Rapid color sorting at 201 fps. Global-shutter assembly-state checks. Embedded marker detection at 1280 × 1024.
Minimum kit: MV-CB013-A0UC-S, an M12-mount lens covering the 1/2-inch sensor, and a USB 3.0 cable providing both data and power form the minimum kit.
Nearby in the range: MV-CB013-A0UM-S — Prefer it when 201 fps is required without color data; MV-CB016-10UC-C V4.0 — Prefer it for 1440 × 1080 color imaging at 165.4 fps.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which optical configurations can MV-CB013-A0UC-S use?
MV-CB013-A0UC-S is the M12-mount execution, so it takes M12 lenses whose image circle covers the 1/2-inch sensor and its 1280 × 1024 active area. The C-mount color board is a separate execution, MV-CB013-A0UC-C.
Does the 201 fps color camera need separate DC power?
No separate DC input is required in the documented arrangement. MV-CB013-A0UC-S is powered from USB 3.0 and consumes 2.8 W, so the host connection provides both the image-data route and operating power.
What resolution is maintained at the listed maximum rate?
The camera is specified for 201 fps with a 1280 × 1024 image. Its USB 3.0 interface carries the color stream, making the model suited to high-cycle tasks that do not require a larger multi-megapixel frame.
How can external timing be connected on this CB013 model?
Two bidirectional non-isolated I/O channels are provided as Line 2 and Line 5. They can link the camera timing to an embedded controller, sensor or illumination control within the electrical limits of the camera design.
What changes when selecting MV-CB013-A0UM-S instead?
The UM model changes the output from color to mono while retaining 1280 × 1024, 201 fps, the global shutter and USB 3.0 power. Its listed consumption is 1.6 W rather than the color model's 2.8 W.