Board level area camera · CB Series
Hikrobot MV-CB020-61UM-B-F
- Lead time
- from 5 days
- Warranty
- 36 months
Operating modes and range position
Two sensor operating modes distinguish MV-CB020-61UM-B-F from the faster 2 MP boards. Its 1/1.7-inch Stacked BSI CMOS sensor records 1624 × 1240 Mono 8 with global shutter and 4.5 µm pixels at up to 99 fps. High full well capacity mode provides 30 µs to 10 sec exposure and 0 dB to 12.8 dB gain; High sensitivity mode starts at 5 µs and extends gain to 24 dB.
The camera suits mono measurement where the integrator needs to choose between the two documented response modes, while retaining global-shutter capture for moving geometry. It can inspect edges, observe motion at 99 fps or acquire longer static exposures. USB 3.0 transfers images, supports USB 2.0 and supplies 5 V power. Typical draw is 1.5 W, and the 29 mm × 29 mm × 27.6 mm unit weighs approximately 37 g.
MV-CB020-61UM-C-F keeps the same sensor, modes and 99 fps rate but adds a C-mount in a 29 mm × 29 mm × 31.3 mm package. MV-CB020-61UM-S-F uses the same 31.3 mm depth with an S-mount. MV-CB020-60UM-B instead uses a smaller 1/2.53-inch sensor with 3.45 µm pixels and raises the full-resolution rate to 179.9 fps. Select 61UM-B-F for its B construction and dual modes; choose C or S by lens interface, or 60UM-B when speed leads.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/1.7″ |
| Sensor resolution | 1624×1240 px |
| Maximum frame rate | 99 fps @ Mono8, resolution 1624×1240 px |
| Color mode | mono |
| Lens mount | not available |
| Data interface | USB 3.0 |
| Dimensions | 29×29×27.6 mm |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 4.5×4.5 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 2 bidirectional lines, non-isolated, lines 2, 5 |
| Power supply | 5 V |
| Power delivery | USB |
| Power consumption | 1.5 W (typical) @ DC, USB, supply voltage 5 V |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…80 % @ non-condensing |
| Weight | 37 g (approx.) |
| Certification | KC, CE, RoHS |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Dual-mode mono measurement. Global-shutter edge inspection. High-sensitivity triggered capture.
Minimum kit: Use the camera with a lens assembly and mechanical mount selected for the 1/1.7-inch sensor, a USB 3.0 cable, and 5 V power supplied through USB.
Nearby in the range: MV-CB020-61UM-C-F — Choose it when the 4.5 µm, 99 fps dual-mode platform needs a C-mount; MV-CB020-61UM-S-F — Choose it when the same sensor and operating modes must use an S-mount; MV-CB020-60UM-B — Choose it for 179.9 fps mono acquisition with 3.45 µm pixels on a 1.6 mm board.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
What changes between the two modes of MV-CB020-61UM-B-F?
High full well capacity mode uses 30 µs to 10 sec exposure and 0 dB to 12.8 dB gain. High sensitivity mode extends exposure down to 5 µs and gain to 24 dB. Both apply to the 1624 × 1240 global-shutter mono sensor.
What frame rate and pixel format does MV-CB020-61UM-B-F output?
The camera reaches 99 fps at 1624 × 1240 Mono 8. Its Stacked BSI CMOS sensor is 1/1.7 inch with 4.5 µm pixels and a global shutter, and the specified dynamic range is 73.9 dB.
How is MV-CB020-61UM-B-F powered through its USB link?
The supply is 5 V through USB 3.0, and typical power consumption is 1.5 W. USB 3.0 is also the image interface and is compatible with USB 2.0. Two bidirectional non-isolated I/O lines are provided for timing.
What package must be accommodated for MV-CB020-61UM-B-F?
The camera measures 29 mm × 29 mm × 27.6 mm and weighs approximately 37 g. Optical design must cover its 1/1.7-inch sensor; the integration should also keep operation within 0 °C to 50 °C.
How does MV-CB020-60UM-B differ in speed and pixel size?
MV-CB020-60UM-B runs at 179.9 fps with 3.45 µm pixels on a 1/2.53-inch sensor. MV-CB020-61UM-B-F runs at 99 fps with 4.5 µm pixels on a 1/1.7-inch sensor and adds high-full-well and high-sensitivity modes.