Board level area camera · CB Series
Hikrobot MV-CB020-61UM-C-F
- Lead time
- from 5 days
- Warranty
- 36 months
Applications around the C-mount build
C-mount mechanics frame the dual-mode 2 MP mono capability of MV-CB020-61UM-C-F. A 1/1.7-inch Stacked BSI CMOS sensor provides 1624 × 1240 Mono 8, 4.5 µm pixels and global shutter capture at 99 fps. The camera offers a 73.9 dB dynamic range in a 29 mm × 29 mm × 31.3 mm package weighing approximately 37 g.
The two operating modes support different capture conditions in edge inspection, alignment measurement and moving-component observation. High full well capacity mode spans 30 µs to 10 sec and 0 dB to 12.8 dB gain. High sensitivity mode begins at 5 µs and reaches 24 dB gain. USB 3.0 carries data and 5 V power at a typical 1.5 W, remains compatible with USB 2.0, and works alongside two bidirectional non-isolated I/O lines.
MV-CB020-61UM-S-F changes only the documented optical interface to S-mount while keeping the sensor, modes, 99 fps rate and package dimensions. MV-CB020-61UM-B-F has a 27.6 mm depth and the same approximately 37 g weight. MV-CB020-60UM-S provides S-mount mono capture with 3.45 µm pixels and increases speed to 179.9 fps, but its dynamic range is 68.6 dB. Choose 61UM-C-F when C-mount optics and the larger-pixel dual-mode sensor belong together.
Specifications
| Product type | 2 MP USB 3.0 Board Level Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 1/1.7″ |
| Resolution | 1624 × 1240 |
| Pixel size | 4.5 µm × 4.5 µm |
| Maximum frame rate | 99 fps @ 1624 × 1240 Mono 8 |
| Mono color | Mono |
| Dynamic range | 73.9 dB |
| Exposure time | High full well capacity: 30 μs to 10 sec High sensitivity: 5 μs to 10 sec |
| Gain | High full well capacity: 0 dB to 12.8 dB High sensitivity: 0 dB to 24 dB |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Lens mount | C-mount |
| Power supply | 5 V, USB 3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC (USB power supply) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 31.3 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 37 g (0.08 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | USB3 Vision, GenICams |
Selection and applications
C-mount mono alignment checks. Dual-mode edge measurement. Triggered moving-component capture.
Minimum kit: Use the camera with a C-mount lens covering the 1/1.7-inch sensor, a USB 3.0 cable, and 5 V power provided through the USB host.
Nearby in the range: MV-CB020-61UM-S-F — Choose it when an S-mount is required with the same 99 fps dual-mode sensor.; MV-CB020-61UM-B-F — Choose it when the same 1/1.7-inch sensor is needed in a 27.6 mm-deep B construction.; MV-CB020-60UM-S — Choose it when 179.9 fps speed and 3.45 µm pixels take precedence over the C-mount..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
Which C-mount sensor format must a lens cover on MV-CB020-61UM-C-F?
The lens must cover the camera's 1/1.7-inch sensor, which uses 4.5 µm pixels and outputs 1624 × 1240 Mono 8. The integrated interface is C-mount, and the body dimensions are 29 mm × 29 mm × 31.3 mm.
When is High sensitivity mode relevant on MV-CB020-61UM-C-F?
High sensitivity mode provides 5 µs to 10 sec exposure and 0 dB to 24 dB gain. High full well capacity mode instead starts at 30 µs and limits gain to 12.8 dB, giving the integrator two documented operating ranges.
What motion capability follows from MV-CB020-61UM-C-F specifications?
The sensor uses a global shutter and records 1624 × 1240 Mono 8 at up to 99 fps. These facts support synchronized geometry capture on moving parts, with exposure down to 5 µs in High sensitivity mode.
How does the USB connection power MV-CB020-61UM-C-F?
USB 3.0 carries images and supplies 5 V power, with a typical draw of 1.5 W. The interface also supports USB 2.0. Line 2 and Line 5 provide the two bidirectional non-isolated I/O connections for external timing.
What is the optical difference between the C-F and S-F versions?
MV-CB020-61UM-C-F uses C-mount, whereas MV-CB020-61UM-S-F uses S-mount. Both share the 1/1.7-inch Stacked BSI sensor, 4.5 µm pixels, 1624 × 1240 Mono 8 output, 99 fps limit and 31.3 mm depth.