Area camera · CE Series
Hikrobot MV-CE050-31GC V3.0
- Lead time
- from 5 days
- Warranty
- 36 months
Discontinued
The manufacturer has discontinued this model.
Last buy date at the manufacturer: 2025-12-30.
Manufacturer-listed replacement:
Color detail over Gigabit Ethernet
Five-megapixel color imaging over Gigabit Ethernet is the defining balance of MV-CE050-31GC V3.0. Its 1/2.5-inch Aptina AR0521 CMOS sensor records 2592 × 1944 with 2.2 µm pixels, a rolling shutter and a maximum rate of 24 fps. The design fits detail-led color inspection in which subjects can be stationary during exposure.
Assembly verification, label inspection and color-dependent presence checks can use the full pixel array, while the 21 µs to 1 sec exposure range covers short lit captures and longer static observations. PoE permits data and power on the Ethernet route. The 29 mm × 29 mm × 42 mm body accepts C-mount lenses, and its opto-isolated input and output provide signal paths for a networked cell.
MV-CE050-30UC retains the Aptina AR0521 and 2592 × 1944 array but uses USB3.0 and reaches 44.7 fps. MV-CE060-10UC increases resolution to 3072 × 2048 and runs at 42.7 fps over USB3.0 for color tasks needing more spatial samples. MV-CE013-80GC V3.0 instead drops to 1280 × 1024 while increasing speed to 89.9 fps and changing to a global shutter.
Specifications
| Shutter | rolling |
| Sensor model | Aptina AR0521 |
| Nominal optical sensor format | 1/2.5″ |
| Sensor resolution | 2592×1944 px |
| Maximum frame rate | 24 fps @ resolution 2592×1944 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS |
| Pixel size | 2.2×2.2 µm |
| Dynamic range | 63 dB |
| Signal-to-noise ratio | 37 dB |
| Exposure time | 21…1000000 µs |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…23 dB |
| Pixel format | Mono8, Mono10, Mono12, BayerGB8, BayerGB10, BayerGB10p, BayerGB12, BayerGB12p, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Image buffer | 128 MB |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | Hirose 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 2.4 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP30 |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…80 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 68 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Color verification of indexed assemblies. Label detail capture at 2592 × 1944. PoE-connected inspection cells.
Minimum kit: Start with the MV-CE050-31GC V3.0, a C-mount lens, a Gigabit Ethernet cable, and either a PoE source or a 9 VDC to 24 VDC supply through the 6-pin Hirose connector.
Nearby in the range: MV-CE050-30UC — Prefer it for the same 2592 × 1944 sensor over USB3.0 at 44.7 fps; MV-CE060-10UC — Prefer it for 3072 × 2048 color imaging over USB3.0 at 42.7 fps; MV-CE013-80GC V3.0 — Prefer it for global-shutter color capture at 89.9 fps and 1280 × 1024.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
When does the rolling shutter fit an inspection sequence?
The Aptina AR0521 uses a rolling shutter and outputs 2592 × 1944 color frames at up to 24 fps. It fits stations where the object is held, indexed or otherwise stationary during exposure, allowing the full five-megapixel image to be used for detail analysis.
What optical coverage does the Aptina AR0521 require?
The sensor format is 1/2.5 inch and the mechanical interface is C-mount. A lens should cover that format and resolve detail across the 2592 × 1944 array, whose pixels measure 2.2 µm × 2.2 µm.
Can the Ethernet link carry both images and camera power?
Yes. MV-CE050-31GC V3.0 supports PoE on its Gigabit Ethernet link and is compatible with Fast Ethernet. External supply from 9 VDC to 24 VDC is also supported; typical draw is 2.4 W at 12 VDC.
Which I/O channels are provided for cell integration?
The 6-pin Hirose connector carries one opto-isolated input on Line 0, one opto-isolated output on Line 1 and one bidirectional non-isolated channel on Line 2. It also serves as the external power connection.
How is this model positioned against MV-CE050-30UC?
Both cameras use the Aptina AR0521 at 2592 × 1944. MV-CE050-31GC V3.0 is a 24 fps color model with a rolling shutter and Gigabit Ethernet, while MV-CE050-30UC uses USB3.0 and reaches 44.7 fps.