Area camera · CE series
Hikrobot MV-CE060-10UM
The manufacturer is transitioning this series to newer line-ups. The model is on the current price list — an engineer will confirm availability, lead time and the current successor in the first reply.
- Lead time
- from 5 days
- Warranty
- 36 months
Six-megapixel USB station fit
A 3072 × 2048 Sony IMX178 image at 42.7 fps gives MV-CE060-10UM a detail-and-rate balance for USB-connected area inspection. The sensor uses a 1/1.8-inch format and reaches a 71.3 dB dynamic range. USB3.0 is the primary data interface, with USB2.0 compatibility, while a C-mount accepts the imaging lens.
The pixel count supports contour measurement, component presence checks and surface-feature localisation when the selected field of view places the required detail across the array. USB3.0 power keeps a bench station compact, and 12 VDC is also supported. A 6-pin Hirose connector provides isolated input and output plus one bidirectional non-isolated I/O for exchange with machine controls.
MV-CE060-10UC shares the Sony IMX178, 3072 × 2048 resolution, 42.7 fps rate and USB3.0 interface, with color output explicitly specified for the UC model. MV-CE050-30UC runs slightly faster at 44.7 fps but uses 2592 × 1944 and a smaller 1/2.5-inch sensor. MV-CE120-10UM V2.0 is the documented mono step to 4000 × 3036, with a rolling shutter and 31.9 fps ceiling.
Specifications
| Shutter | rolling |
| Sensor model | Sony® IMX178 |
| Nominal optical sensor format | 1/1.8″ |
| Sensor resolution | 3072×2048 px |
| Maximum frame rate | 42.7 fps @ resolution 3072×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS |
| Pixel size | 2.4×2.4 µm |
| Dynamic range | 71.3 dB |
| Signal-to-noise ratio | 41.3 dB |
| Exposure time | 16…1000000 µs |
| Auto exposure | Off, Once, Continuous, global reset; triggered rolling shutter, rolling shutter |
| Gain | 0…20 dB |
| Pixel format | Mono8, Mono10, Mono10p, Mono12, Mono12p |
| Binning | 1x1, 2x2 |
| Decimation | not available |
| Image buffer | 128 MB |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | Hirose 6-pin |
| Power supply | 12 V |
| Power delivery | external power supply, USB |
| Power consumption | 2.7 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Ingress protection | IP30 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…80 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 56 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal |
Documents
Selection and applications
Contour measurement at 3072 × 2048. USB-powered component presence checks. Surface-feature localisation at 42.7 fps.
Minimum kit: Start with the MV-CE060-10UM, a C-mount lens, a USB3.0 cable, and either USB3.0 bus power or a 12 VDC supply.
Nearby in the range: MV-CE060-10UC — Prefer it when color output is required at the same 3072 × 2048 and 42.7 fps; MV-CE050-30UC — Prefer it for 2592 × 1944 USB3.0 imaging at 44.7 fps; MV-CE120-10UM V2.0 — Prefer it for documented mono output at 4000 × 3036 and 31.9 fps.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What inspection detail can the 3072 × 2048 array support?
The Sony IMX178 provides 3072 × 2048 samples across a 1/1.8-inch format. That makes the camera suitable for contour, presence and surface-feature analysis when the lens and field of view map the smallest required feature onto enough image samples.
How should C-mount optics be sized for MV-CE060-10UM?
Select a C-mount lens with image coverage for a 1/1.8-inch sensor. The lens also needs resolving capability matched to the 3072 × 2048 Sony IMX178 array so that the camera's spatial sampling is useful across the intended field.
Does this model need a separate power cable for USB use?
Not when the USB3.0 power route is used. The camera can receive supply through USB3.0 and consumes 2.7 W at 5 VDC. A 12 VDC source is the alternative stated supply path for installations that separate power from data.
What machine-side connections are present on the 6-pin port?
The 6-pin Hirose interface includes one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. These connections provide discrete signal paths alongside the USB3.0 image link.
How does MV-CE060-10UM compare with the UC execution?
Both MV-CE060-10UM and MV-CE060-10UC list the Sony IMX178, 3072 × 2048, 42.7 fps, 71.3 dB and USB3.0. The UC execution explicitly specifies color output, while the two share the same 29 mm × 29 mm × 30 mm body size.