Area camera · CH series
Hikrobot MV-CH050-90XM-C-NN
- Lead time
- from 5 days
- Warranty
- 36 months
High-frame-rate CoaXPress applications
A 2592 × 2160 Gpixel GMAX2505 sensor delivers Mono 8 or Mono 12 frames at up to 213 fps in MV-CH050-90XM-C-NN. The 1/2-inch CMOS array combines 2.5 µm pixels with global shutter and CoaXPress through a DIN interface. This is a speed-led five-megapixel-class camera for motion inspection that still requires enough spatial sampling for feature and defect analysis.
The camera fits fast conveyor sorting, print-motion inspection, dynamic mechanism analysis, and measurement of moving parts. Global shutter preserves geometry across each exposure, while a P10 connector provides isolated input and output, a bidirectional line, and RS-232 for synchronized control. Its C-mount has a 17.52 mm flange focal length, and the 50 mm × 50 mm × 45 mm body keeps the high-rate imaging head compact.
MV-CH050-10CM records 2432 × 2048 at 140 fps through Camera Link, offering a different acquisition architecture at a similar resolution class. MV-CU013-80UM reaches 240.4 fps over USB3.0 but drops to 1280 × 1024. MV-CH650-90XM-F-NF retains CoaXPress and global shutter, moving to 9344 × 7000 at 31.5 fps for much finer spatial sampling.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX2505 |
| Nominal optical sensor format | 1/2″ |
| Sensor resolution | 2592×2160 px |
| Maximum frame rate | 213 fps @ Mono8, resolution 2592×2160 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | CoaXPress; RS-232 |
| Sensor technology | CMOS |
| Pixel size | 2.5×2.5 µm |
| Dynamic range | 63.8 dB |
| Signal-to-noise ratio | 37 dB |
| Exposure time | 5…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Linear gain factor | 1 1.25 1.5 Show all (5)1.752 |
| Pixel format | Mono8, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Flange focal distance | 17.52 mm |
| Data interface connector | DIN |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P10 12-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply; PoCXP @ ports CXP-1 |
| Power consumption | 5.3 W (typical) @ supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 50×50×45 mm |
| Weight | 220 g (approx.) |
| Certification | CE, RoHS, KC |
| PoCXP support | yes @ ports CXP-1 |
| Port inventory | CoaXPress CXP-6 ×2 (data), RS-232 (serial) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
High-speed conveyor defect capture. Global-shutter print-motion inspection. Dynamic mechanism measurement.
Minimum kit: The minimum image-acquisition setup is MV-CH050-90XM-C-NN, a C-mount lens covering 1/2 inch, and a CoaXPress DIN cable with a matching acquisition interface.
Nearby in the range: MV-CH050-10CM — Prefer it for 2432 × 2048 global-shutter capture at 140 fps through Camera Link; MV-CU013-80UM — Prefer it for 240.4 fps over USB3.0 when 1280 × 1024 is sufficient; MV-CH650-90XM-F-NF — Prefer it for 9344 × 7000 CoaXPress imaging at 31.5 fps.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- Power
- Power
- Mounting
- Camera mounts
FAQ
What enables 213 fps motion inspection on this camera?
The GMAX2505 uses global shutter and outputs 2592 × 2160 Mono 8 at up to 213 fps. Simultaneous frame exposure preserves moving geometry, while the CoaXPress interface carries the resulting high-rate image stream to the acquisition system.
Which optical dimensions apply to MV-CH050-90XM-C-NN?
The camera uses C-mount with a 17.52 mm flange focal length in front of a 1/2-inch sensor. Choose coverage for that format and resolution for 2.5 µm pixels across 2592 × 2160, then set focal length from the scene geometry.
What cable and host interface does the image path require?
Image data is sent through CoaXPress with a DIN interface. The setup therefore needs a matching CoaXPress DIN cable and acquisition interface able to handle the chosen Mono 8 or Mono 12 format at the required frame rate.
Can decimation reduce the native 2592 × 2160 raster?
Decimation options include 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, and 4 × 4. These modes reduce sampled output when the inspection does not need the complete native raster.
What machine I/O accompanies the CoaXPress connection?
The 12-pin P10 connector provides one opto-isolated input, one opto-isolated output, one bidirectional non-isolated I/O, and one RS-232 channel. These signals support trigger, lighting, status, and serial-control integration.
How large and protected is the high-speed camera body?
The enclosure measures 50 mm × 50 mm × 45 mm and is rated IP40 when the lens and wiring are installed correctly. This supports a compact mounting envelope while requiring external protection where liquid exposure could reach the camera.