Area camera · CH series
Hikrobot MV-CH1030-90TC-M58S-NN
- Lead time
- from 5 days
- Warranty
- 36 months
High-resolution area inspection
A 11264 × 9200 Gpixel GMAX32103 sensor captures 103.6 MP frames with a global shutter at up to 11 fps. The 46.6 mm CMOS sensor uses 3.2 × 3.2 µm pixels and an M58*0.75 lens mount. This combination is aimed at detailed inspection over a large image area, where a single exposure must retain fine spatial sampling across the complete object.
Global exposure keeps the full frame on one timing reference for moving-part capture, while the exposure range from 20 µs to 10 sec covers short illuminated acquisitions and long static acquisitions. A 10 Gigabit Ethernet link carries the image stream and remains compatible with Gigabit Ethernet. Trigger and control wiring is available through the 12-pin P10 connector, including one opto-isolated input, one output and one bidirectional non-isolated I/O.
The operating envelope sets the selection boundary for MV-CH1030-90TC-M58S-NN. Select it when the required image raster is 11264 × 9200, the optics can cover a 46.6 mm sensor through M58*0.75, and the acquisition rate fits within 11 fps. The 84 × 84 × 92.5 mm IP40 housing operates from 0 to 50 °C and requires 12 to 24 V DC, with consumption stated at 13.3 W.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX32103 |
| Sensor resolution | 11264×9200 px |
| Maximum frame rate | 11 fps @ BayerGB8, resolution 11264×9200 px |
| Color mode | color |
| Lens mount | M58×0.75 |
| Data interface | 10GigE (GigE compatible) |
| Sensor technology | CMOS |
| Pixel size | 3.2×3.2 µm |
| Dynamic range | 64.86 dB |
| Signal-to-noise ratio | 39.88 dB |
| Exposure time | 20…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Linear gain factor | 1.4…5.2 |
| Pixel format | Mono8, Mono10, Mono12, BayerGB8, BayerGB10, BayerGB10Packed, BayerGB12, BayerGB12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Flange focal distance | 11.48 mm |
| Protocol compatibility | GigE Vision; GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit); Windows 11 (64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power consumption | 13.3 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 84×84×92.5 mm |
| Weight | 738 g (approx.) |
| Certification | CE, RoHS, KC |
| Physical sensor diagonal | 46.6 mm |
| Port inventory | RS-232 (serial) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Large-area inspection at 103.6 MP. Global-shutter capture up to 11 fps. Detailed imaging through 10 Gigabit Ethernet.
Minimum kit: The minimum imaging kit is MV-CH1030-90TC-M58S-NN, an M58*0.75 lens covering the 46.6 mm sensor, a 10 Gigabit Ethernet cable, a 12-pin P10 control cable and a power connection for the 12 to 24 V DC supply.
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
What lens mount and image-circle coverage does this camera require?
The mount is M58*0.75 and the sensor size is 46.6 mm. Lens selection must therefore match that mount and cover the sensor format while resolving the 3.2 × 3.2 µm pixel pitch.
What network interface is needed for full-rate acquisition?
The primary link is 10 Gigabit Ethernet at 10000 Mbit/s, with Gigabit Ethernet at 1000 Mbit/s compatibility. The maximum camera output is 11 fps at 11264 × 9200.
How do the global shutter and exposure range address motion?
The Gpixel GMAX32103 is a CMOS global-shutter sensor, so the full image shares one exposure interval. Exposure can be set from 20 µs to 10 sec, allowing timing to be matched to motion and illumination.
Which trigger and control signals are available at the connector?
The 12-pin P10 connector provides one opto-isolated input, one opto-isolated output, one bidirectional non-isolated I/O and one RS-232 connection for camera control and station sequencing.
What supply and power consumption should be allowed for?
The camera accepts 12 to 24 V DC and has stated power consumption of 13.3 W. Plan that supply connection together with the 10 Gigabit Ethernet data path required for image transfer.
What enclosure and thermal range apply during installation?
The housing is rated IP40 and measures 84 × 84 × 92.5 mm. Operating temperature is 0 to 50 °C, storage temperature is -30 to 70 °C, and the camera weighs 738 g.