Hikrobot MV-CH120-60TC-C-NF V2.0

High-rate colour applications

Colour capture at 80 fps across 4096 × 3072 pixels defines MV-CH120-60TC-C-NF V2.0. The 12.6 MP camera combines a 1.1-inch Stacked BSI sensor, 3.45 µm pixels and a global shutter with 10 Gigabit Ethernet. Bayer GB 8 data travels at the full-frame rate, while exposure spans 20 µs to 10 sec and gain ranges from 0 dB to 18 dB. A C-mount sits on the fan-cooled 50 mm × 45 mm × 68.6 mm housing.

The imaging combination suits fast colour classification, registration checking and assembly-state capture as objects move through the field. The 20 µs lower exposure limit reduces travel during capture when illumination provides enough energy, and a hardware trigger can enter through the isolated Line 0 input on the 6-pin P7 connector. Image data uses a 10000 Mbit/s path; the camera is also compatible with 1000 Mbit/s Gigabit Ethernet. Power is supplied separately at 9 VDC to 24 VDC.

MV-CH120-60TC-C-NF V2.0 is the colour 80 fps 10 Gigabit Ethernet variant. MV-CH120-60TM-C-NF matches its Stacked BSI sensor, frame rate and C-mount but supplies Mono 8. MV-CH120-60Y1C-NN V2.0 retains colour, 4096 × 3072 and 80 fps while changing the transport to CoaXPress with Micro-BNC and supporting PoCXP. MV-CH120-15TC-M58S-NF uses a Sony® IMX253 and M58 × 0.75 mount at 68.3 fps over 10 Gigabit Ethernet.

Documents

Selection and applications

80 fps colour sorting and registration. 20 µs global-shutter capture of moving parts. 4096 × 3072 streaming over 10 Gigabit Ethernet.

Minimum kit: MV-CH120-60TC-C-NF V2.0, a C-mount lens, a 10 Gigabit Ethernet cable and a 9 VDC to 24 VDC supply are required for the minimum imaging chain.

Nearby in the range: MV-CH120-60TM-C-NF — Prefer it for Mono 8 at the same 4096 × 3072 resolution and 80 fps; MV-CH120-60Y1C-NN V2.0 — Prefer it for 80 fps colour through CoaXPress with Micro-BNC and PoCXP.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE10GigE

I/O & power cables

Hirose 6-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What host interface carries the 80 fps colour stream?

The camera uses 10 Gigabit Ethernet at 10000 Mbit/s for its 4096 × 3072 Bayer GB 8 stream at 80 fps. It is compatible with 1000 Mbit/s Gigabit Ethernet, which provides a smaller data channel.

Which C-mount sensor geometry must the optical design cover?

The Stacked BSI sensor has a 1.1-inch format with 3.45 µm × 3.45 µm pixels and 4096 × 3072 active resolution. MV-CH120-60TC-C-NF V2.0 attaches the lens through C-mount.

How is motion exposure controlled at the full colour rate?

A global shutter exposes the frame simultaneously, and the exposure setting runs from 20 µs to 10 sec. The 6-pin P7 connection adds one opto-isolated trigger input and one opto-isolated output for machine timing.

What power and thermal provisions does the 10 GigE body need?

Input power is 9 VDC to 24 VDC and typical consumption is 8.7 W at 12 VDC. The 50 mm × 45 mm × 68.6 mm body contains a fan and is specified for operation from 0 °C to 50 °C.

How does the CoaXPress colour variant differ at the same 80 fps?

MV-CH120-60Y1C-NN V2.0 keeps the Stacked BSI sensor, 4096 × 3072 Bayer GB 8 output and 80 fps. It uses CoaXPress with Micro-BNC, supports PoCXP and measures 29 mm × 29 mm × 42 mm.