Hikrobot MV-CH140-60GM

Where to use this camera

Large-frame mono inspection is the central use of MV-CH140-60GM, with 4708 × 2824 capture at 9 fps. The CMOS sensor uses a global shutter; its 3 × 3 µm pixels cover a 1 inch sensor; the image path is Gigabit Ethernet; the optical interface is C-mount. The monochrome output suits measurements and contrast-based inspection where color separation is not the measured feature.

Practical targets include wide-scene measurement, strip inspection and monochrome surface analysis. The global shutter keeps the 4708 × 2824 frame temporally aligned on moving or indexed objects, while 9 fps sets the available acquisition cadence. PoE can carry power with the Ethernet link, or the camera can use a 9 V DC to 24 V DC input.

Two same-category references are MV-CH100-60GM and MV-CH140-90YM-M58S-NF. The first combines 4096 × 2460, 11.6 fps and Gigabit Ethernet; prefer it when 11.6 fps acquisition matches the line cadence. The second uses M58 × 0.75 optics with mono output at 339 fps. Prefer it when CoaXPress with Micro-BNC interface is the required image interface.

Documents

Selection and applications

Mono inspection at 4708 × 2824. Geometric capture of moving or indexed parts. Acquisition at 9 fps over Gigabit Ethernet.

Minimum kit: Start with MV-CH140-60GM, a lens with the C-mount interface covering the 1 inch sensor, a cable for Gigabit Ethernet, and PoE or a 9 V DC to 24 V DC supply.

Nearby in the range: MV-CH100-60GM — Prefer it when 11.6 fps acquisition matches the line cadence; MV-CH140-90YM-M58S-NF — Prefer it when CoaXPress with Micro-BNC interface is the required image interface.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

How do shutter timing and frame rate shape MV-CH140-60GM motion capture?

Global-shutter operation keeps the 4708 × 2824 image temporally aligned for MV-CH140-60GM when parts move or index through the scene. The camera reaches 9 fps.

What link and power arrangement are required for MV-CH140-60GM?

MV-CH140-60GM transfers images through Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s). PoE can carry power with the Ethernet link, or the camera can use a 9 V DC to 24 V DC input. Power consumption is 3.0 W @ 12 V DC.

How should optics be selected for the MV-CH140-60GM sensor and mount?

Lens selection for MV-CH140-60GM starts with its C-mount interface. Use an image circle that covers the 1 inch sensor. Resolving power must be assessed for the 3 × 3 µm pixel pitch across the 4708 × 2824 frame. Set focal length from scene width and distance after confirming image-circle coverage.

Which housing and operating limits apply to MV-CH140-60GM?

MV-CH140-60GM has an IP40 enclosure and a 29 × 44 × 59 mm body. The working range is -10 to 50 °C. The humidity range is 20 to 95 % RH. Listed camera mass is 117 g; include it in the bracket and motion-load calculation.

How do MV-CH140-60GM and MV-CH100-60GM differ as selection options?

MV-CH140-60GM records mono images with 9 fps through Gigabit Ethernet; its lens connection is C-mount. MV-CH100-60GM records mono images with 11.6 fps through Gigabit Ethernet and uses C-mount optics. Prefer it when 11.6 fps acquisition matches the line cadence.

Which acquisition and image-stream details are stated for MV-CH140-60GM?

The documented image path is Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s), delivering 4708 × 2824 at 9 fps. The output is Mono and the lens interface is C-mount.