Area camera · CH Series
Hikrobot MV-CH2450-10Q1M-M72-TF
- Lead time
- from 5 days
- Warranty
- 36 months
Applications and neighbours
Monochrome acquisition at 19200 × 12800 makes MV-CH2450-10Q1M-M72-TF the highest-resolution intensity camera in the lineup. The 245.8 MP Sony IMX811 uses a rolling shutter, a 64.84 mm format and 2.81 µm pixels. A single QSFP+ connection transfers Mono 8 at 12.4 fps. This set of properties serves detailed measurement and defect inspection over a very large stationary image area.
Large fixed panels, patterned substrates and broad surfaces can be recorded in one view without a Bayer color pattern. The target should remain stationary for the rolling-shutter capture or move in a controlled step-and-settle cycle. Exposure ranges from 142 µs to 30 sec, and TEC cooling is built into the 120 mm × 120 mm × 89 mm enclosure. A 12-pin P10 port supplies isolated timing I/O, bidirectional I/O and RS-232.
MV-CH2450-10Q1C-M72-TF matches the sensor, 19200 × 12800 frame, 12.4 fps rate and QSFP+ link but outputs Bayer RG 8 color and draws 19.9 W without TEC or 35.3 W with TEC. MV-CH2450-10YC-M72-TF also provides color at 12.4 fps, changing the interface to HDBNC CoaXPress and the enclosure to 100 mm × 100 mm × 82 mm. Select Q1M for monochrome QSFP+, Q1C for color on the same host path, or YC for a color CoaXPress integration.
Specifications
| Shutter | rolling |
| Sensor model | Sony IMX811 |
| Sensor resolution | 19200×12800 px |
| Maximum frame rate | 12.4 fps @ Mono8, resolution 19200×12800 px |
| Color mode | mono |
| Lens mount | M72×0.75 |
| Data interface | RS-232; XoFLink |
| Sensor technology | CMOS |
| Pixel size | 2.81×2.81 µm |
| Dynamic range | 72.1 dB |
| Signal-to-noise ratio | 44.1 dB |
| Exposure time | 142…30000000 µs |
| Auto exposure | Off, Once, Continuous, rolling shutter, global reset |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Flange focal distance | 19.55 mm |
| Data interface connector | QSFP+ |
| Protocol compatibility | XoFLink, GenICam |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 24 V |
| Power delivery | external power supply |
| Power consumption | 17.8 W (typical) @ DC, supply voltage 24 V, TEC cooling off; 32.9 W (typical) @ DC, supply voltage 24 V, TEC cooling on |
| Cooling | thermoelectric |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 120×120×89 mm |
| Weight | 2500 g (approx.) |
| Certification | CE, RoHS |
| Physical sensor diagonal | 64.84 mm |
| Port inventory | RS-232 (serial) |
| Reverse image | horizontal |
Documents
Selection and applications
245.8 MP monochrome surface inspection. Large-area measurement of stationary targets. TEC-cooled Mono 8 capture through QSFP+.
Minimum setup: MV-CH2450-10Q1M-M72-TF, an M72 × 0.75 lens, a QSFP+ data cable, and a 24 V DC supply.
Nearby in the range: MV-CH2450-10Q1C-M72-TF — Prefer it for Bayer RG 8 color on the same 19200 × 12800 QSFP+ platform; MV-CH1510-10XM-M72-TF V2.0 — Prefer it for 14192 × 10640 Mono 8 through DIN CoaXPress.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- 10GigE
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Why select MV-CH2450-10Q1M-M72-TF for intensity inspection?
It outputs Mono 8 over a 19200 × 12800 image area, using every frame for monochrome intensity information rather than Bayer RG 8 color. The Sony IMX811 provides 245.8 MP at 12.4 fps with a 2.81 µm pixel pitch.
What host link does the monochrome Q1M camera require?
The data interface is one QSFP+ port, with XoFLink protocol and GenlCam stated for the camera. That connection carries 19200 × 12800 Mono 8 frames at rates up to the specified 12.4 fps.
Can MV-CH2450-10Q1M-M72-TF image a continuously moving web?
Its Sony IMX811 uses a rolling shutter, so continuous motion can change position during frame readout. Stationary presentation or an indexed step-and-settle sequence is the direct operating match for geometrically stable 19200 × 12800 images.
What are the Q1M power figures with and without TEC?
At 24 V DC, typical consumption is 17.8 W in non-TEC mode and 32.9 W in TEC mode. TEC cooling is built into the enclosure, and the camera measures 120 mm × 120 mm × 89 mm with an approximate mass of 2.5 kg.
What optics interface is fitted to MV-CH2450-10Q1M-M72-TF?
An M72 × 0.75 mount serves the 64.84 mm Sony IMX811 format. The optical system must cover that area while resolving 2.81 µm pixels throughout the 19200 × 12800 image area.