Area camera · CH Series
Hikrobot MV-CH250-90TM-M58S-NF
- Lead time
- from 5 days
- Warranty
- 36 months
Selection context and use cases
An M58 lens interface and fast monochrome output set MV-CH250-90TM-M58S-NF apart within the 26.2 MP group. The Gpixel GMAX0505 global-shutter sensor captures 5120 × 5120 Mono 8 images at 41.5 fps. A 10 Gigabit Ethernet connection carries the stream, while the 2.5 µm pixel pitch supports fine sampling across the square 1.1-inch sensor.
This profile fits repeated dimensional checks, edge analysis, and surface inspection on moving components where color is unnecessary. Exposure can drop to 3 μs in UltraShort mode, helping a strobe arrest motion; standard exposure extends to 10 sec. The fan-cooled housing accepts 9–24 V DC, and the 12-pin P10 interface provides trigger and output lines plus RS-232 for coordinated acquisition.
MV-CH250-90TM-C-NF retains Mono 8, 41.5 fps, and 10 Gigabit Ethernet in the same outer dimensions but changes to C-mount and weighs about 590 g rather than 550 g. MV-CH250-90TC-M58S-NF keeps M58 × 0.75 and the same rate while providing color. MV-CH250-90Y2M-C-NF reaches 85 fps in mono over Micro-BNC CoaXPress with C-mount.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX0505 |
| Nominal optical sensor format | 1.1″ |
| Sensor resolution | 5120×5120 px |
| Maximum frame rate | 41.5 fps @ Mono8, resolution 5120×5120 px |
| Color mode | mono |
| Lens mount | M58×0.75 |
| Data interface | 10GigE (GigE compatible) |
| Sensor technology | CMOS |
| Pixel size | 2.5×2.5 µm |
| Dynamic range | 63 dB |
| Signal-to-noise ratio | 36 dB |
| Exposure time | 3…8 µs @ ultra-short exposure mode; 9…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Linear gain factor | 2…5 |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Flange focal distance | 11.48 mm |
| Protocol compatibility | GigE Vision; GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P10 12-pin |
| Power supply | 9…24 V |
| Power consumption | 9.7 W (typical) @ DC, supply voltage 12 V |
| Cooling | fan |
| Ingress protection | IP40 |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % |
| Dimensions | 74×74×78.8 mm |
| Weight | 550 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | RS-232 (serial) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Monochrome conveyor feature measurement. Strobed square-frame inspection. High-rate edge and surface analysis.
Minimum kit: Use the camera with an M58 × 0.75 lens covering the 1.1-inch sensor, a 10 Gigabit Ethernet cable and host port, and a 9–24 V DC power source.
Nearby in the range: MV-CH250-90TM-C-NF — Choose this counterpart for C-mount optics with the same 41.5 fps Mono 8 output; MV-CH250-90TC-M58S-NF — Choose this counterpart for Bayer BG 8 color through the same M58 mount; MV-CH250-90Y2M-C-NF — Choose it for monochrome 85 fps acquisition over Micro-BNC CoaXPress.
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What distinguishes MV-CH250-90TM-M58S-NF optically?
The camera uses an M58 × 0.75 mount rather than C-mount. Its lens must cover the 1.1-inch Gpixel GMAX0505 sensor and resolve a 2.5 µm pitch across 5120 × 5120 pixels; focal length follows the required object coverage and working distance.
What monochrome rate is available at the full square frame?
Full-resolution Mono 8 output is specified at up to 41.5 fps. The 5120 × 5120 array provides 26.2 MP per frame, and the global shutter makes that rate applicable to moving-part capture without sequential row exposure.
How should the 10 Gigabit Ethernet path be provisioned?
The camera presents a 10000 Mbit/s 10 Gigabit Ethernet interface and can also operate at 1000 Mbit/s Gigabit Ethernet. To retain the full 41.5 fps stream, size the receiving interface and processing path for the selected Mono 8 image flow.
What electrical supply and control lines does the camera need?
Power input spans 9 V DC to 24 V DC, with typical consumption of 9.7 W at 12 V DC. The P10 connector has one isolated input, one isolated output, one bidirectional non-isolated line, and an RS-232 channel for control integration.
What does fan cooling mean for installation planning?
The camera includes a fan and occupies 74 mm × 74 mm × 78.8 mm. Its working range is 0 °C to 50 °C, and IP40 applies when lens and wiring are installed correctly. Allow the housing and its cooling path appropriate space in the station.