Area camera · CH Series
Hikrobot MV-CH650-90XM-M58S-NF
- Lead time
- from 5 days
- Warranty
- 36 months
Engineering use and alternatives
For mono capture, MV-CH650-90XM-M58S-NF couples the Gpixel GMAX3265 with a 9344 × 7000 frame and 31.5 fps @ 9216 × 7000. The CMOS sensor uses a global shutter; its 3.2 µm × 3.2 µm pixels cover a 29.9 mm × 22.4 mm sensor; the image path is CoaXPress with DIN interface; the optical interface is M58 × 0.75. The monochrome output suits measurements and contrast-based inspection where color separation is not the measured feature.
Practical targets include high-detail metrology on moving parts, edge tracking and surface inspection. The global shutter keeps the 9344 × 7000 frame temporally aligned on moving or indexed objects, while 31.5 fps @ 9216 × 7000 sets the available acquisition cadence. The stated supply range is 9 V DC to 24 V DC. The 12-pin P10 connector provides the listed control lines for coordinating acquisition with the machine.
Two same-category references are MV-CH650-90XC-M58S-NF and MV-CH650-90YM-M58S-NN. The first combines 9344 × 7000, 31.5 fps @ 9344 × 7000 and CoaXPress with DIN interface; prefer it when color output with 31.5 fps @ 9344 × 7000 is required. The second uses M58 × 0.75 optics with mono output at 71 fps @ 9344 × 7000. Prefer it when CoaXPress with Micro-BNC interface is the required image interface.
Specifications
| Product type | 65.4 MP CoaXPress Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX3265 |
| Sensor format | 29.9 mm × 22.4 mm |
| Resolution | 9344 × 7000 |
| Pixel size | 3.2 µm × 3.2 µm |
| Maximum frame rate | 31.5 fps @ 9216 × 7000 |
| Mono color | Mono |
| Dynamic range | 66 dB |
| Exposure time | 14 μs to 10 sec |
| Gain | 1.25x to 6x |
| Data interface | CoaXPress with DIN interface |
| Digital I/O | 12-pin P10 connector provides I/O: opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Lens mount | M58 × 0.75 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 10.5 W @ 24 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 74 mm × 74 mm × 70.4 mm (2.9″ × 2.9″ × 2.8″) |
| Weight | approx. 470 g (1.0 lb.) |
| Certification | CE-EMC, KC, UL, FCC-SDoC |
| Compatibility | CoaXPress, GenICam |
| Cooling | With fan |
Engineering data for this model
Calculated by the MVisionPro engineering tools from the passport data of this model for typical tasks. The figures are estimates for preliminary selection.
Engineering conclusion: The confirmed mode 9344 × 7000 px · 31.5 fps · Mono8 gives a raw stream of 16.483 Gbit/s over CoaXPress, which fits one link.
Data stream by interface
| Confirmed mode | Passport condition | Interface | Raw stream per camera |
|---|---|---|---|
| 9344 × 7000 px · 31.5 fps · Mono8 | 31.5 fps @ 9216 × 7000 | CoaXPress | 16.483 Gbit/s |
How these figures were calculated
- Assumption: Stream bandwidth uses the confirmed wire bits per pixel before protocol overhead.
- Assumption: A selected camera is checked only against its passport interface profile.
- Warning: The passport frame rate is tied to the stated mode conditions.
Engineering tools
Configure a kit · Check interface · Calculate optics for this camera
Selection and applications
Mono inspection at 9344 × 7000. Geometric capture of moving or indexed parts. Acquisition at 31.5 fps @ 9216 × 7000 over CoaXPress with DIN interface.
Minimum kit: Start with MV-CH650-90XM-M58S-NF, a lens with the M58 × 0.75 interface covering the 29.9 mm × 22.4 mm sensor, a cable for CoaXPress with DIN interface, and a 9 V DC to 24 V DC supply.
Nearby in the range: MV-CH650-90XC-M58S-NF — Prefer it when color output with 31.5 fps @ 9344 × 7000 is required.; MV-CH650-90YM-M58S-NN — Prefer it when CoaXPress with Micro-BNC interface is the required image interface..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What motion profile suits the shutter used in MV-CH650-90XM-M58S-NF?
Global-shutter operation keeps the 9344 × 7000 image temporally aligned for MV-CH650-90XM-M58S-NF when parts move or index through the scene. The camera reaches 31.5 fps @ 9216 × 7000, and exposure can be set within 14 µs to 10 s.
What must the host and power design provide for MV-CH650-90XM-M58S-NF?
MV-CH650-90XM-M58S-NF transfers images through CoaXPress with DIN interface. The stated supply range is 9 V DC to 24 V DC. Power consumption is Typ. 10.5 W @ 24 V DC.
How do mount and sensor format guide lens choice for MV-CH650-90XM-M58S-NF?
Lens selection for MV-CH650-90XM-M58S-NF starts with its M58 × 0.75 interface. Use an image circle that covers the 29.9 mm × 22.4 mm sensor. Resolving power must be assessed for the 3.2 µm × 3.2 µm pixel pitch across the 9344 × 7000 frame. Set focal length from scene width and distance after confirming image-circle coverage.
Which installation limits matter around MV-CH650-90XM-M58S-NF?
MV-CH650-90XM-M58S-NF has an IP40 (under proper lens installation and wiring) enclosure and a 74 mm × 74 mm × 70.4 mm (2.9" × 2.9" × 2.8") body. The working range is 0 °C to 50 °C (32 °F to 122 °F). The humidity range is 20% RH to 95% RH (no condensation). Listed camera mass is approx. 470 g (1.0 lb.); include it in the bracket and motion-load calculation.
How should MV-CH650-90XM-M58S-NF be compared with MV-CH650-90XC-M58S-NF?
MV-CH650-90XM-M58S-NF records mono images with 31.5 fps @ 9216 × 7000 through CoaXPress with DIN interface; its lens connection is M58 × 0.75. MV-CH650-90XC-M58S-NF records color images with 31.5 fps @ 9344 × 7000 through CoaXPress with DIN interface and uses M58 × 0.75 optics. Prefer it when color output with 31.5 fps @ 9344 × 7000 is required.
How can MV-CH650-90XM-M58S-NF be synchronized with the machine?
MV-CH650-90XM-M58S-NF uses the following control connection: 12-pin P10 connector provides I/O: opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. Exposure spans 14 µs to 10 s, and gain spans 1.25x to 6x.