Line scan camera · CL Series
Hikrobot MV-CL161-B1Y4M
- Lead time
- from 5 days
- Warranty
- 36 months
High-rate monochrome line-scan role
A 16384-pixel monochrome line at up to 200 kHz places MV-CL161-B1Y4M at the high-rate end of this group. Its CMOS array is 16384 × 1 with 5 µm × 5 µm pixels and 1-Line scanning. CoaXPress-12 transmission uses Micro-BNC interfaces, delivering 200 kHz in Mono 8/10 and 197.3 kHz in Mono 12. This pairing serves moving-surface inspection where long line coverage and a very high acquisition rate are selected together.
The camera exposes from 3 µs to 10 ms, offers 1.0 × and 2.0 × gain, and lists a 61.3 dB dynamic range. A 12-pin P10 connector carries power and four configurable I/O lines with single-ended or differential signaling. Input is 12 VDC to 24 VDC; CXP-0, CXP-1 and CXP-2 also support PoCXP. The M90*1 mount has a 12 mm flange back and can take an F-mount lens through an adapter ring.
MV-CL161-B1Y4M is the speed-led 16384 × 1 option: MV-CL161-41CM has the same line length and 1-line monochrome format but uses 3.5 µm pixels, Camera Link and a 50 kHz ceiling. MV-CL081-B0F2M shortens the line to 8192 × 1 while raising its fiber link to 240 kHz. Where row integration is needed, MV-CL162-B0F2M provides a 16384 × 2 sensor, 1-Line and 2-TDI modes, and 105 kHz through a 2LC fiber connector.
Specifications
| Sensor resolution | 16384×1 px |
| Maximum line rate | 200000 Hz @ Mono8/Mono10; 197300 Hz @ Mono12 |
| Line/TDI image mode | single line |
| Color mode | mono |
| Lens mount | M90×1 |
| Data interface | CoaXPress |
| Sensor technology | CMOS |
| Pixel size | 5×5 µm |
| Dynamic range | 61.3 dB |
| Signal-to-noise ratio | 38.8 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Off, Once, Continuous, trigger width |
| Linear gain factor | 1; 2 |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line @ external trigger |
| Flange focal distance | 12 mm |
| Data interface connector | Micro-BNC |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power delivery | external power supply; PoCXP @ ports CXP-0; PoCXP @ ports CXP-1; PoCXP @ ports CXP-2 |
| Power consumption | 16.3 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 99×99×81.65 mm |
| Weight | 780 g (approx.) |
| Certification | CE, RoHS, KC |
| Mounts via adapter | F-mount (via adapter) |
| PoCXP support | yes @ ports CXP-0; yes @ ports CXP-1; yes @ ports CXP-2 |
| Transmission mode | one link, two links, three links, four links |
| CoaXPress generation | CXP-12 |
| Reverse image | horizontal |
Documents
Selection and applications
16384-pixel monochrome surface inspection. CoaXPress-12 capture at 200 kHz. High-rate Mono 12 line acquisition.
Minimum kit: Use MV-CL161-B1Y4M with an M90*1 lens or adapted F-mount lens, Micro-BNC CoaXPress-12 cabling, plus PoCXP on the supported links or a 12 VDC to 24 VDC P10 supply.
Nearby in the range: MV-CL161-41CM — Choose it when 16384 × 1 monochrome capture at 50 kHz must use Camera Link; MV-CL081-B0F2M — Choose it for an 8192 × 1 line and a 240 kHz maximum over 2LC fiber; MV-CL162-B0F2M — Choose it when 2-TDI and 16384 × 2 capture are needed over a 2LC fiber connector.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which pixel formats set the line-rate limits of MV-CL161-B1Y4M?
The camera reaches 200 kHz in Mono 8 and Mono 10. Selecting Mono 12 changes the stated maximum to 197.3 kHz, while the sensor remains at its full 16384-pixel line length.
Can MV-CL161-B1Y4M receive power through its CoaXPress links?
Yes. The power entry identifies 12 VDC to 24 VDC and states that CXP-0, CXP-1 and CXP-2 support PoCXP. Typical camera consumption is 16.3 W at 24 VDC.
What lens interface is required for the 16384-pixel monochrome line?
MV-CL161-B1Y4M uses an M90*1 mount with a 12 mm flange-back distance. An F-mount lens can be installed by adapter ring, provided the optic covers the full 16384-pixel line formed by 5 µm pixels.
How are external signals connected to MV-CL161-B1Y4M?
The 12-pin P10 connector provides power and four configurable input/output lines identified as Line 0, Line 1, Line 3 and Line 4. The I/O supports either single-ended or differential signaling.
What mounting environment is allowed for MV-CL161-B1Y4M?
Rated operation is –20 °C to 50 °C with 20% RH to 95% RH without condensation. The 99 mm × 99 mm × 81.65 mm body is about 780 g and carries an IP40 rating after proper lens installation and wiring.