Line scan camera · CL Series
Hikrobot MV-CL162-B0F2C
- Lead time
- from 5 days
- Warranty
- 36 months
Color format, fiber links and throughput
Two-link fiber throughput makes MV-CL162-B0F2C the color 16384-pixel member with format-dependent rates. The 16384 × 2 CMOS line uses 3.5 µm × 3.5 µm pixels and a 2LC connector. In 1 Link mode it ranges from 24.4 kHz for RGB 8/BGR 8 to 73.2 kHz for Bayer BRGG 8; 2 Link mode reaches 49.3 kHz for RGB 8/BGR 8, 65 kHz for Mono or Bayer RG formats, and 130 kHz for Bayer BRGG 8.
The camera uses 1-Line acquisition, with exposure from 3 µs to 10 ms, gains of 1.0 × and 2.0 ×, and 63.8 dB dynamic range. Digital I/O is not supported. A 12-pin P10 connector accepts 12 VDC to 24 VDC, while typical consumption is 15.8 W at 12 VDC. The M72*0.75 optical mount has a 12 mm flange back and can take an F-mount lens through an adapter. IP40 protection applies with correct lens installation and wiring.
This is the only 16384 × 2 color model in the group. MV-CL162-B0F2M uses the same resolution, pixel pitch and 2LC fiber connector for monochrome 1-Line and 2-TDI capture; its maximum line rate is 105 kHz. MV-CL166-B0F2C provides a deeper 16384 × 12 color sensor, supports 1-Line through 4-TDI operation and lists a 40 kHz maximum, using an M90*1.0 mount. MV-CL086-B0F1C shortens the color line to 8192 pixels and uses a single LC interface at 40 kHz in all modes.
Specifications
| Sensor resolution | 16384×2 px |
| Maximum line rate | 24400 Hz @ links 1, RGB8/BGR8 65000 Hz @ links 1, Mono8/BayerRG8 58500 Hz @ links 1, Mono10/BayerRG10 Show all (8)48800 Hz @ links 1, Mono12/BayerRG1273200 Hz @ links 1, BayerBRGG8 49300 Hz @ links 2, RGB8/BGR8 65000 Hz @ links 2, Mono8/Mono10/Mono12/BayerRG8/BayerRG10/BayerRG12 130000 Hz @ links 2, BayerBRGG8 |
| Line/TDI image mode | single line |
| Color mode | color |
| Lens mount | M72×0.75 |
| Data interface | XoFLink |
| Sensor technology | CMOS |
| Pixel size | 3.5×3.5 µm |
| Dynamic range | 63.8 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Off, Once, Continuous, trigger width |
| Linear gain factor | 1; 2 |
| Pixel format | Mono8, Mono10, Mono12, BayerRG8, BayerRG10, BayerRG12, RGB8, BGR8; BayerBRGG8 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line @ external trigger |
| Flange focal distance | 12 mm |
| Data interface connector | LC ×2 |
| Protocol compatibility | XoFLink, GenICam |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | not available |
| Power supply | 12…24 V |
| Power delivery | external power supply |
| Power consumption | 15.8 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 5…90 % @ non-condensing |
| Dimensions | 132×76×55.5 mm |
| Weight | 600 g (approx.) |
| Certification | CE, RoHS, KC |
| Mounts via adapter | F-mount (via adapter) |
| Transmission mode | one link, two links |
| Power supply connector | P10 12-pin |
| Reverse image | horizontal |
Documents
Selection and applications
16384-pixel color fiber inspection. Two-link Bayer line acquisition. Color surface scanning at 130 kHz.
Minimum kit: Combine MV-CL162-B0F2C with an M72*0.75 lens or adapted F-mount optic, a cable for the 2LC fiber connector, and a 12 VDC to 24 VDC source through the 12-pin P10 connection.
Nearby in the range: MV-CL162-B0F2M — Select it for monochrome 16384 × 2 capture with 1-Line and 2-TDI modes; MV-CL166-B0F2C — Select it for a 16384 × 12 color arrangement with modes through 4-TDI; MV-CL086-B0F1C — Select it when 8192 × 12 color capture over a single LC interface is sufficient.
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
Why does MV-CL162-B0F2C line rate depend on the selected pixel format?
The published rates vary by both link count and format. In 2 Link mode, RGB 8/BGR 8 reaches 49.3 kHz, Mono and Bayer RG formats reach 65 kHz, and Bayer BRGG 8 reaches 130 kHz.
What does 1 Link mode provide on the MV-CL162-B0F2C camera?
With 1 Link, the camera lists 24.4 kHz for RGB 8/BGR 8, 65 kHz for Mono 8 and Bayer RG 8, 58.5 kHz for Mono 10 and Bayer RG 10, and 48.8 kHz for Mono 12 and Bayer RG 12.
Are configurable digital signals available on MV-CL162-B0F2C?
No digital I/O is supported on this model. Its 2LC connector carries the fiber image path, while the 12-pin P10 connection is identified for the 12 VDC to 24 VDC power input.
Which lens connection covers the MV-CL162-B0F2C sensor line?
The camera uses an M72*0.75 mount with a 12 mm flange back and supports an F-mount lens by adapter. The optic must cover a 16384-pixel line built from 3.5 µm × 3.5 µm pixels.
What operating conditions apply to the MV-CL162-B0F2C body?
Operation is rated from –20 °C to 50 °C and humidity from 5% RH to 90% RH without condensation. The 132 mm × 76 mm × 55.5 mm body weighs about 600 g and is rated IP40 after correct installation.