Hikrobot MV-CT0CG0089/G

BASE version: what you get

Same sensor, other versions:

Same version, other sensor variant:

Use cases and model choice

Wide colour frames across a 4096 × 2160 matrix define this high-detail GigE option. The Stacked BSI CMOS device in MV-CT0CG0089/G outputs 4096 × 2160 px in colour at 13.9 fps. A global shutter, 3.45 × 3.45 µm pixel pitch and 1-inch sensor format define the optical side; Gigabit Ethernet on the RJ45 connector defines the data side.

The global shutter and 13.9 fps ceiling support wide-aspect print inspection, colour comparison and multi-part presence checks, with the full field exposed on the same timing basis. Exposure extends through 10 µs to 19 µs in UltraShort mode and 20 µs to 10 s in Standard mode. Trigger Width and Trigger Controlled modes allow exposure to follow external timing. The 29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.7") body accepts C-mount optics. IP40 protection applies with proper lens installation and wiring, and the working range is –30 °C to 60 °C (–22 °F to 140 °F).

Comparison within the CT area-camera family turns on resolution, rate and interface. MV-CT0MG0089/G keeps 4096 × 2160 px and 13.9 fps but changes the output to Mono. MV-CT0CU0089/G uses USB 3.0 for 4096 × 2160 px colour capture at 42 fps. MV-CT0CG0120/G provides 4096 × 3000 px at 9.9 fps with a global-shutter colour path over Gigabit Ethernet. Retain MV-CT0CG0089/G when Color output, Gigabit Ethernet and PoE are needed together at 13.9 fps.

Documents

Selection and applications

Colour feature capture at 4096 × 2160 px. Triggered colour inspection with a global shutter. Full-frame acquisition up to 13.9 fps.

Minimum kit: Use MV-CT0CG0089/G with a C-mount lens, a Gigabit Ethernet cable to the RJ45 connector, and either PoE or 9 V DC to 24 V DC power through the 8-pin M8 A-Code connection.

Nearby in the range: MV-CT0MG0089/G — Prefer it for Mono output at the same 4096 × 2160 px and 13.9 fps; MV-CT0CU0089/G — Prefer it for USB 3.0 transport at 4096 × 2160 px and 42 fps; MV-CT0CG0120/G — Prefer it for 4096 × 3000 px, 9.9 fps and global-shutter colour capture.

Compatible lens options

• MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1″ sensor; 12 MP optical class — headroom for this camera
• MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1″ sensor; 25 MP optical class — headroom for this camera

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

CT: power and I/O

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

Which suggested lenses cover the sensor in MV-CT0CG0089/G?

For MV-CT0CG0089/G, the C-mount matches are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Their image circles cover the 1-inch sensor, and the 12 MP and 25 MP lens classes are above the camera’s 4096 × 2160 px matrix. Both therefore match the stated mount, sensor coverage and resolution requirement.

How should power and cabling be arranged for MV-CT0CG0089/G?

The camera accepts 9 V DC to 24 V DC and also supports PoE. The RJ45 connector carries Gigabit Ethernet; the 8-pin M8 A-Code connection provides DC power and I/O when separate power is used. Consumption is typically 1.8 W at 12 V DC.

What data interface and peak acquisition rate does MV-CT0CG0089/G provide?

Data uses Gigabit Ethernet at 1 Gbit/s through RJ45 and remains compatible with Fast Ethernet. The stated full-frame ceiling is 13.9 fps at 4096 × 2160 Bayer GB 8. MVS and software meeting the GigE Vision protocol are supported.

How do shutter timing and exposure affect motion work with MV-CT0CG0089/G?

The CMOS sensor uses a global shutter, so all pixels share the exposure timing for moving-part capture. Full-frame rate is 13.9 fps, and the exposure range is 10 µs to 19 µs in UltraShort mode and 20 µs to 10 s in Standard mode. Trigger Width and Trigger Controlled operation are available.

Which image-reduction and I/O functions are available on MV-CT0CG0089/G?

Binning and decimation each support 1 × 1, 2 × 2 and 4 × 4 operation. Horizontal and vertical reverse-image output is available. The 8-pin M8 A-Code I/O provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line for sequencing.

What enclosure conditions and temperature range apply to MV-CT0CG0089/G?

Operation is rated from –30 °C to 60 °C (–22 °F to 140 °F), with 20% RH to 95% RH (no condensation). The housing is 29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.7") and weighs approximately 116 g (0.3 lb.). Its IP40 rating applies under proper lens installation and wiring, so the station must provide conditions consistent with that protection level.