Area camera · CT series
Hikrobot MV-CT1CG0050/G
- Lead time
- from 5 days
- Warranty
- 36 months
PRO version: what you get
Same sensor, other versions:
Same version, other sensor variant:
Five-megapixel applications and context
Color detail at 2448 × 2048 px combines with 59.2 fps in MV-CT1CG0050/G. The 2/3 in Stacked BSI CMOS sensor has a global shutter and 3.45 × 3.45 µm pixels. Bayer GR 8 reaches the stated full-frame speed with lossless compression enabled, while Gigabit Ethernet uses a sealed 8-pin M12 X-Code connector and can supply power through PoE.
This 5 MP class supports inspection of colored surface features, component orientation and print content on parts moving at moderate line rates. High-sensitivity exposure begins at 5 µs, and Trigger Width or Trigger Controlled timing can coordinate a short illumination event. The IP67 housing is intended for correctly sealed machine wiring, with 2 × 2 and 4 × 4 binning or decimation available for lower-data jobs.
MV-CT1CG0032/G reaches 77.5 fps at 2048 × 1536 px, trading detail for cycle rate. MV-CT1CG0060/R adds horizontal sampling at 3072 × 2048 px but uses a Sony IMX178 rolling shutter and falls to 40.0 fps. MV-CT1CU0050/G produces the same 2448 × 2048 px color frame at 80 fps over USB 3.0. Select MV-CT1CG0050/G when PoE and Gigabit Ethernet outweigh the USB speed gain.
Specifications
| Shutter | global |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 24.5 fps @ BayerGR8, resolution 2448×2048 px; 59.2 fps @ lossless compression, BayerGR8, resolution 2448×2048 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, BayerGR8, BayerGR10, BayerGR10Packed, BayerGR12, BayerGR12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Control interface | not available |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 1.5 W (typical) @ DC, fast heat balance off, supply voltage 12 V |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 124 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Colored surface-feature inspection. Moderate-rate print verification. PoE component-orientation checks.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: The minimum set is the camera, a C-mount lens, a Gigabit Ethernet cable for the 8-pin M12 X-Code interface, and PoE or a 9–24 V DC supply.
Nearby in the range: MV-CT1CG0032/G — Prefer it for 77.5 fps when 2048 × 1536 px is adequate; MV-CT1CG0060/R — Prefer it for 3072 × 2048 px at 40.0 fps when rolling shutter fits the scene.
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 2/3″ sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 2/3″ sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: M12 EthernetGigE
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
- Protection
- CT: IP67 covers
FAQ
Which lenses match the 2/3 in sensor in MV-CT1CG0050/G?
The suggested C-mount lenses are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Their image sizes both cover the 2/3 in sensor. The stated 12 MP and 25 MP lens classes are higher than the camera's 2448 × 2048 px output, meeting the listed resolution relationship.
What power arrangements are available for MV-CT1CG0050/G?
PoE can power the camera over its 8-pin M12 X-Code Gigabit Ethernet link. Typical consumption is 1.5 W at 12 V DC when fast heat balance is not enabled. For separate power, the 8-pin M8 A-Code connector accepts 9 V DC to 24 V DC and also exposes the discrete I/O.
Is MV-CT1CG0050/G suitable for moving color features?
The sensor has a global shutter and supplies 59.2 fps at 2448 × 2048 px in Bayer GR 8 with lossless compression enabled. High-sensitivity exposure can be as short as 5 µs. Together with Trigger Width and Trigger Controlled modes, this supports machine-timed capture of moving features.
How can MV-CT1CG0050/G adjust resolution and bit depth?
Binning and decimation are available at 1 × 1, 2 × 2 and 4 × 4. The camera outputs Bayer GR from 8 through 12Packed, YUV422 variants, RGB 8, BGR 8 and Mono 8. These settings let an integrator reduce spatial sampling or select a suitable color representation before transfer.
What are the environmental ratings of MV-CT1CG0050/G?
When the lens, lens cap and wiring are fitted correctly, the camera is rated IP67. Its working span is –30 °C to 60 °C with 20% RH to 95% RH non-condensing humidity. The housing is 29 mm × 29 mm × 42 mm and weighs approximately 124 g.