Area camera · CT series
Hikrobot MV-CT1CU0032/G
- Lead time
- from 5 days
- Warranty
- 36 months
PRO version: what you get
Same sensor, other versions:
Same version, other sensor variant:
Compact USB color applications
Triple-digit color capture and a sealed compact body meet in MV-CT1CU0032/G. The 1/1.8 in Stacked BSI CMOS sensor records 2048 × 1536 px Bayer GR 8 at 104.8 fps with a global shutter. Its 3.45 × 3.45 µm pixels, USB 3.0 Type-C link, C-mount and 29 mm × 29 mm × 30 mm enclosure suit a close-host machine vision station.
The camera supports moving color-feature checks, assembly verification and label orientation where 3.2 MP detail must be captured above 100 fps. High-sensitivity exposure begins at 5 µs, and Trigger Width or Trigger Controlled operation can coordinate a short strobe. IP67 protection applies with correct lens, lens cap and wiring installation, while 2 × 2 and 4 × 4 binning or decimation offer lower-data modes.
MV-CT0MU0032/G matches 2048 × 1536 px and 104.8 fps in monochrome, but its enclosure is IP40 and its listed mass is 72 g rather than the color model's approximate 70 g. MV-CT1CG0032/G keeps color and IP67 while changing to Gigabit Ethernet and PoE; its listed rate is 77.5 fps with lossless compression enabled. Select MV-CT1CU0032/G for faster USB color imaging in the sealed short body.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/1.8″ |
| Sensor resolution | 2048×1536 px |
| Maximum frame rate | 104.8 fps @ BayerGR8, resolution 2048×1536 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS; stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 74.4 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, BayerGR8, BayerGR10, BayerGR10Packed, BayerGR12, BayerGR12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Data interface connector | USB Type-C |
| USB 2.0 compatibility | yes |
| Control interface | not available |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | M8 8-pin A-coded |
| Power supply | 9…24 V |
| Power delivery | external power supply, USB |
| Power consumption | 1.6 W (typical) @ DC, fast heat balance off, USB 3.0, supply voltage 5 V |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 70 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
High-rate color assembly checks. Triggered label orientation. Compact sealed USB inspection.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Pair the camera with a C-mount lens, a USB 3.0 Type-C cable, and USB power or a separate 9–24 V DC source.
Nearby in the range: MV-CT0MU0032/G — Prefer it for monochrome 2048 × 1536 px at the same 104.8 fps; MV-CT1CG0032/G — Prefer it for Gigabit Ethernet and PoE at 2048 × 1536 px and 77.5 fps.
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1/1.8″ sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.8″ sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: USB Type-CUSB 3.0
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
- Protection
- CT: IP67 covers
FAQ
Which C-mount lenses are suggested for MV-CT1CU0032/G?
The listed lenses are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Each covers the 1/1.8 in sensor format, and the 12 MP and 25 MP lens classes are higher than the 2048 × 1536 px camera output. Both therefore meet the documented sensor coverage and nominal detail criteria.
Can MV-CT1CU0032/G be powered directly from USB 3.0?
Yes. The Type-C USB 3.0 connection carries data and can provide power; typical draw is 1.6 W at 5 V DC when fast heat balance is not enabled. USB 2.0 compatibility is also listed. A separate 9 V DC to 24 V DC source can enter through the 8-pin M8 A-Code power and I/O port.
What supports full-frame motion capture on MV-CT1CU0032/G?
The global shutter exposes the 2048 × 1536 px image together, and Bayer GR 8 reaches 104.8 fps. High-sensitivity exposure can start at 5 µs. Trigger Width and Trigger Controlled modes let acquisition follow a machine sensor or defined illumination interval.
How do the two exposure ranges of MV-CT1CU0032/G differ?
High-full-well-capacity operation covers 30 µs to 10 sec with gain from 0 dB to 12.8 dB. High-sensitivity operation covers 5 µs to 10 sec and extends gain to 24 dB. The two settings provide documented alternatives for short illumination and scenes needing more gain.
What keeps the MV-CT1CU0032/G enclosure at its IP67 rating?
The IP67 rating requires proper lens, lens cap and wiring installation. The 29 mm × 29 mm × 30 mm camera weighs approximately 70 g and works from –30 °C to 60 °C. The humidity interval is 20% RH to 95% RH without condensation.