Area camera · CU Series
Hikrobot MV-CU013-A0UC
- Lead time
- from 5 days
- Warranty
- 36 months
Fast color capture through USB 3.0
A 201.4 fps color stream at 1280 × 1024 places MV-CU013-A0UC among the fast USB cameras in the CU group. Its 1/2-inch CMOS sensor uses 4.8 µm pixels, Bayer GB 8 output and a global shutter. Exposure begins at 5 µs and extends to 10 sec, while the listed dynamic range is 53 dB and gain runs from 0 dB to 16 dB.
The camera suits fast color-state, orientation and presence decisions on moving parts. Simultaneous exposure controls geometric skew, and the 5 µs lower setting supports short exposures when the lighting permits. USB 3.0 supplies both the image link and a supported power path; a 6-pin P7 connection adds one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O.
MV-CU013-A0UM is the Mono 8 counterpart with the same 201.4 fps rate, sensor format and 1280 × 1024 grid. MV-CU013-A1UC raises color speed to 210 fps on the same 1/2-inch format. MV-CU013-80UC reaches 240.4 fps on a smaller 1/2.7-inch SS sensor with 4.0 µm pixels. Pick A0UC for color USB capture with the 1/2-inch, 4.8 µm optical geometry and 5 µs exposure floor.
Specifications
| Shutter | global |
| Sensor model | HK |
| Nominal optical sensor format | 1/2″ |
| Sensor resolution | 1280×1024 px |
| Maximum frame rate | 201.4 fps @ BayerGB8, resolution 1280×1024 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS |
| Pixel size | 4.8×4.8 µm |
| Dynamic range | 53 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 5…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…16 dB |
| Pixel format | BayerGB8, BayerGB10, BayerGB10Packed, BayerGB12, BayerGB12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows XP (32/64-bit), Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit), macOS (64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, USB |
| Power consumption | 1.81 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Ingress protection | IP30 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 76 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Fast color-state inspection. Global-shutter orientation checks. USB-triggered moving-part capture.
Minimum kit: Use a C-mount lens covering the 1/2-inch sensor and a USB 3.0 cable supplying 5 V DC, or connect the camera to a 9–24 V DC source.
Nearby in the range: MV-CU013-A0UM — Select it for Mono 8 output with the same 201.4 fps and 1/2-inch sensor; MV-CU013-A1UC — Select it when color USB capture at 210 fps is required; MV-CU013-80UC — Select it for a 1/2.7-inch sensor and color acquisition at 240.4 fps.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
How does MV-CU013-A0UC combine color, speed and motion capture?
The camera records 1280 × 1024 Bayer GB 8 color at up to 201.4 fps. Its CMOS sensor uses a global shutter, and exposure can be reduced to 5 µs, giving the integrator both simultaneous frame timing and a short setting for moving targets.
Can the A0UC run from USB power without a separate supply?
USB 3.0 power is supported and typical consumption is 1.81 W at 5 V DC. A 9–24 V DC input is also listed, so the camera can use the host-side USB feed or the machine power connection according to the installation.
Which C-mount lens coverage matches the MV-CU013-A0UC?
The lens must cover the camera's 1/2-inch sensor. Its 4.8 µm pixels form a 1280 × 1024 image, and the mechanical interface is C-mount. Scene coverage, working distance and required object sampling determine the focal length.
What trigger and status I/O is available on the USB camera?
The 6-pin P7 connector provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. The USB 3.0 link carries images, while these discrete lines provide hardware timing and machine-status exchange.
What mechanical and ambient limits apply to MV-CU013-A0UC?
The 76 g body measures 29 mm × 29 mm × 30 mm and is rated IP30 with correct lens installation and wiring. Its operating range is 0–50 °C at 20–95% RH without condensation, so added protection depends on the machine environment.