Hikrobot MV-CU060-60GC

Role in a compact vision station

A 1/2.4-inch BSI sensor gives MV-CU060-60GC a 3200 × 1944 colour raster from 2 µm pixels at 19 fps. The CMOS device uses a rolling shutter and sends Bayer BG 8 frames through Gigabit Ethernet at up to 1000 Mbit/s. This combination targets compact colour inspection where fine sampling, a small optical format, and network placement matter more than high-speed motion capture.

Suitable work includes print registration, coloured-part sorting after indexing, component-presence verification, and stationary surface review. The 29 mm × 29 mm × 42 mm housing takes C-mount optics and draws a typical 1.6 W at 12 V DC. Optional PoE can consolidate power and data, or the P7 connector can accept 9 V DC to 24 V DC and provide isolated trigger and output lines.

MV-CU060-60GM keeps the 3200 × 1944 BSI geometry and 19 fps but outputs Mono 8 for contrast-led inspection. MV-CU060-10GC uses the larger 1/1.8-inch Sony IMX178 at 3072 × 2048 and 19.1 fps, with 2.4 µm pixels. MV-CU120-10GC increases colour resolution to 4024 × 3036, while the full-frame rate decreases to 9.7 fps.

Available versions

One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.

Documents

Selection and applications

Compact colour component checks. Indexed print registration inspection. Networked BSI image capture.

Minimum kit: The minimum setup is MV-CU060-60GC, a C-mount lens covering 1/2.4 inch, a Gigabit Ethernet cable, and either optional PoE or a 9 V DC to 24 V DC supply through P7.

Nearby in the range: MV-CU060-60GM — Prefer it for Mono 8 data with the same 3200 × 1944 BSI sensor geometry; MV-CU060-10GC — Prefer it for the 1/1.8-inch Sony IMX178 and 2.4 µm pixels; MV-CU120-10GC — Prefer it when 4024 × 3036 colour resolution is required and 9.7 fps is sufficient.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

Hirose 6-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What distinguishes MV-CU060-60GC from MV-CU060-10GC?

MV-CU060-60GC uses a 1/2.4-inch BSI sensor with 2 µm pixels and a 3200 × 1944 raster at 19 fps. MV-CU060-10GC uses a 1/1.8-inch Sony IMX178 with 2.4 µm pixels and records 3072 × 2048 colour frames at 19.1 fps.

Which network and power paths are available on this BSI camera?

The interface is Gigabit Ethernet at 1000 Mbit/s and is also compatible with 100 Mbit/s Fast Ethernet. PoE is optional. For separate power, the camera accepts 9 V DC to 24 V DC, with typical consumption of 1.6 W at 12 V DC.

How should a C-mount lens be selected for MV-CU060-60GC?

Choose a C-mount lens that covers the 1/2.4-inch sensor and can resolve the 2 µm pixel sampling across 3200 × 1944. Because the optical format is small, verify both image-circle coverage and the required field of view rather than selecting on mount alone.

Is the 19 fps colour stream suited to moving conveyors?

The sensor uses a rolling shutter, so 19 fps alone does not ensure geometrically correct capture of a moving part. The camera fits indexed conveyors where the object pauses, or installations that control exposure and lighting. A global-shutter camera is the appropriate comparison for continuous motion.

What enclosure and ambient conditions apply to MV-CU060-60GC?

The camera is rated IP30 with correct lens installation and wiring. It operates from 0 °C to 50 °C and from 20% to 95% RH without condensation. Machine design should therefore keep dust, liquid, and condensing humidity away from the imaging head.