Frame grabber · CoaXPress
Hikrobot MV-GX1004
- Lead time
- from 5 days
- Warranty
- 36 months
Four-channel acquisition role
Four DIN 1.0/2.3 camera inputs place MV-GX1004 in multi-camera CXP-6 acquisition. Link rates from 1.25 through 6.25 Gbit/s are accepted on each connection, and 4 GB of DDR3-RAM buffers the incoming data. The board transfers through PCI-E gen2 × 8 at 3900 MB/s maximum and 3350 MB/s sustained bandwidth, with Mono and Bayer depths up to 16 bits plus RGB 8.
A four-view inspection cell can route its coaxial camera feeds to one host board and use the available opto-isolated, RX422, TX422 or TTL connections for machine timing. Eleven additional lines support configurable single-ended or differential I/O and frame-grabber cascading. Each CXP channel can provide as much as 13 W at 24 V DC over PoCXP, keeping eligible camera power on the same cable as acquisition data.
MV-GX1004 is the four-port counterpart to MV-GX1002: sustained bandwidth remains 3350 MB/s, while camera count and DDR3 memory double from two and 2 GB to four and 4 GB. MV-GX1104 preserves four CXP-6 ports and 4 GB but uses DDR4 and PCI-E gen3 × 4, with fewer enumerated I/O groups. For twice the host bandwidth and eight inputs, MV-GX1008 provides 6700 MB/s sustained transfer over PCI-E gen3 × 8.
Specifications
| Data interface | CoaXPress |
| Board bandwidth | 31200 Mbit/s (max.); 26800 Mbit/s (sustained) |
| Camera connectors | CoaXPress DIN 1.0/2.3 ×4 |
| Host interface | PCIe 2.0 x8 |
| Maximum cameras | 4 |
| Pixel format | Mono8, Mono10, Mono12, Mono16, Bayer8, Bayer10, Bayer12, Bayer16, RGB8 |
| Image buffer | 4000 MB |
| Protocol compatibility | CoaXPress, GenICam |
| Communication protocol versions | CoaXPress 1.0, CoaXPress 1.1 |
| Client software | MVS |
| Operating systems | Windows 7, Windows 10, Windows 11, Ubuntu 16.04–20.04 |
| Digital I/O lines | 4 inputs, opto-isolated, input 4.5…28 V; 4 outputs, opto-isolated, output 4.5…28 V; 4 inputs, RX422; 4 outputs, TX422; 4 inputs, TTL; 4 outputs, TTL |
| Digital I/O connector | HD26 26-pin female |
| Power consumption | 14.4 W (typical) @ excluding PoCXP output |
| Working temperature | 0…55 °C |
| Storage temperature | -20…70 °C |
| Humidity | 10…95 % @ non-condensing |
| Dimensions | 181×126.3×21.6 mm |
| Certification | RoHS, CE, KC |
| Channel bandwidth | 1250 Mbit/s 2500 Mbit/s 3125 Mbit/s Show all (5)5000 Mbit/s6250 Mbit/s |
| CoaXPress generation | CXP-6; CXP-1, CXP-2, CXP-3, CXP-5, CXP-6 |
| Frame grabber camera supply output power | 13 W (max., per port) @ DC, supply voltage 24 V |
| Frame grabber output voltage | 24 V |
| Memory technology | DDR3 |
| Output power rating basis | per port |
| Streams | 4 |
| Supported SDKs | custom application development |
| Bus indicators | 1 |
| Camera output power delivery | PoCXP |
| GPIO voltage | 4.5…28 V @ input/output, I/O isolation opto-isolated |
| Stream indicator count | 4 |
Documents
Selection and applications
Four-view CXP-6 inspection. Buffered multi-camera acquisition. Isolated event-controlled capture.
Minimum kit: Fit MV-GX1004 to a PCI-E gen2 × 8 host, connect up to four CXP-6 cameras with DIN 1.0/2.3 coaxial cables, and use PoCXP within 13 W at 24 V DC on each channel.
Nearby in the range: MV-GX1002 — Prefer it when two CXP-6 ports and a 2 GB buffer cover the system; MV-GX1104 — Prefer it for four CXP-6 inputs on PCI-E gen3 × 4 with DDR4 memory; MV-GX1008 — Prefer it for eight inputs and 6700 MB/s sustained transfer.
FAQ
How many CXP-6 cameras can MV-GX1004 connect at once?
The board has four DIN 1.0/2.3 camera interfaces and supports as many as four cameras. Each link can operate at 1.25, 2.5, 3.125, 5 or 6.25 Gbit/s, allowing the four ports to be configured around the attached CXP-6 devices.
What transfer bandwidth is stated for the MV-GX1004 host path?
Its PCI-E gen2 × 8 connection is rated at 3900 MB/s maximum transmission bandwidth and 3350 MB/s sustained transmission bandwidth. The frame grabber also carries 4 GB of DDR3-RAM for buffering the four incoming links.
How much PoCXP power can MV-GX1004 provide per channel?
Every camera channel can provide up to 13 W at 24 V DC through PoCXP. The allowance is per channel, so each attached camera must fit that limit. Typical frame-grabber consumption without the PoCXP load is 14.4 W.
Does MV-GX1004 expose isolated and differential machine I/O?
Yes. The listed connections include opto-isolated inputs and outputs, RX422 inputs, TX422 outputs, TTL inputs and TTL outputs. Eleven configurable lines additionally support single-ended or differential signaling and cascading.
Which host platforms and acquisition tools support MV-GX1004?
Support covers Windows 7/10/11 and Ubuntu 16.04 through 20.04 on Linux. The software entries identify MVS as the client and an SDK for secondary development, covering configuration and custom host integration.
When should MV-GX1004 be selected instead of MV-GX1008?
Select MV-GX1004 for as many as four CXP-6 cameras on PCI-E gen2 × 8 with 3350 MB/s sustained transfer. MV-GX1008 is the eight-camera, PCI-E gen3 × 8 option and raises sustained bandwidth to 6700 MB/s.