Hikrobot MV-CA032-10GC

Discontinued

The manufacturer has discontinued this model.

Last buy date at the manufacturer: 2025-12-30.

Manufacturer-listed replacement:

Resolution, timing and range context

Inspection in color at 2048 × 1536 defines MV-CA032-10GC, using the Sony IMX265 CMOS sensor with a global shutter and 37.5 fps acquisition at full resolution. Its 1/1.8-inch format uses 3.45 µm pixels and provides a 73 dB dynamic range. Gigabit Ethernet, with Fast Ethernet operation also stated, supports network placement of the 29 × 29 × 42 mm camera.

The global shutter and UltraShort exposure mode from 1 µs to 14 µs support synchronized capture of moving components under suitably timed illumination. Standard exposure extends from 15 µs to 10 sec. Its color output can separate colored marks or parts, while the 2048 × 1536 image supports position, presence and surface checks. PoE permits one Ethernet run for power and data.

MV-CA032-10GM keeps the Sony IMX265, 2048 × 1536 resolution and 37.5 fps rate but records mono output and 3.2 W rather than 3.5 W. MV-CA023-10GC lowers resolution to 1920 × 1200 and raises speed to 41 fps with larger 5.86 µm pixels. MV-CA050-12GC raises resolution to 2448 × 2048 but reduces the maximum rate to 24.1 fps. Select MV-CA032-10GC for color, 2048 × 1536 and a PoE network link.

Documents

Selection and applications

Verification of color marks and components. Short-exposure moving-part inspection. Networked 2048 × 1536 capture.

Minimum kit: The minimum setup is MV-CA032-10GC, a C-mount lens, a Gigabit Ethernet cable, and either PoE or a 12 V DC supply.

Nearby in the range: MV-CA032-10GM — Choose it for mono output at the same 2048 × 1536 resolution and 37.5 fps; MV-CA023-10GC — Choose it for color output at 41 fps with 1920 × 1200 resolution; MV-CA050-12GC — Choose it for 2448 × 2048 resolution when 24.1 fps is sufficient.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

Hirose 6-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What full-resolution performance does MV-CA032-10GC provide?

The camera records color images at 2048 × 1536 and up to 37.5 fps. It uses a Sony IMX265 CMOS global-shutter sensor in a 1/1.8-inch format with 3.45 µm × 3.45 µm pixels.

How short can exposure be for synchronized moving-part capture?

UltraShort exposure mode covers 1 µs to 14 µs. Standard exposure mode begins at 15 µs and extends to 10 sec, giving separate ranges for brief triggered illumination and longer acquisitions.

Which supply methods can power the MV-CA032-10GC network camera?

MV-CA032-10GC supports PoE through its Gigabit Ethernet interface and also accepts 12 V DC. Typical consumption is 3.5 W at 12 V DC, and Fast Ethernet operation is also stated.

Which hardware I/O lines are present for triggers and outputs?

The 6-pin Hirose connector provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O line. These connections support an external trigger and synchronized output signaling.

How does MV-CA032-10GC differ from the monochrome variant?

MV-CA032-10GC records color output and typically consumes 3.5 W at 12 V DC. MV-CA032-10GM records mono output and 3.2 W, while both provide 2048 × 1536 at 37.5 fps over Gigabit Ethernet.