Area camera · CH Series
Hikrobot MV-CH050-60NM
- Lead time
- from 5 days
- Warranty
- 36 months
Monochrome tasks in a 2.5 GigE layout
Distributed monochrome inspection is the role of MV-CH050-60NM. Its Stacked BSI CMOS sensor delivers 2448 × 2048 Mono 8 at 60 fps through 2.5 Gigabit Ethernet. A global shutter, 2/3-inch optical format and 3.45 µm pixels make the camera suitable for networked edge, position and surface analysis on moving production parts.
Exposure starts at 5 µs and extends to 10 sec, so the same camera can freeze conveyor motion or integrate a static low-light scene. PoE allows power and image transfer through the Ethernet connection, while 9 V DC to 24 V DC remains available. The 6-pin P7 I/O includes isolated input and output for trigger and lighting timing.
MV-CH050-60NC is the color version with the same 60 fps and 2.5 Gigabit Ethernet link. MV-CH050-10UM provides 74.1 fps monochrome output through USB 3.0 on an IMX250 sensor. MV-CH050-90TM-C-NF raises monochrome speed to 163.4 fps over 10 Gigabit Ethernet. MV-CH050-60NM fits when PoE network wiring and 60 fps monochrome capture are sufficient.
Specifications
| Shutter | global |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 60 fps @ Mono8, resolution 2448×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | 2.5GigE (GigE compatible) |
| Sensor technology | CMOS; stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 69.6 dB |
| Signal-to-noise ratio | 44.1 dB |
| Exposure time | 5…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 3.6 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -10…45 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Networked edge and position inspection. Monochrome surface checks at 60 fps. PoE-triggered capture of moving parts.
Minimum kit: MV-CH050-60NM, a 2/3-inch C-mount lens, a 2.5 Gigabit Ethernet cable, and either PoE or a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH050-60NC — Select it when color information is required on the same 60 fps 2.5 Gigabit Ethernet platform; MV-CH050-10UM — Select it for 74.1 fps monochrome output over USB 3.0; MV-CH050-90TM-C-NF — Select it for 163.4 fps monochrome output over 10 Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Why choose the monochrome member of the 60N camera pair?
MV-CH050-60NM produces Mono 8 rather than Bayer color data while retaining 2448 × 2048, 60 fps and the Stacked BSI platform. It fits checks based on intensity, boundaries, position and surface contrast.
Will the camera also communicate on a Gigabit Ethernet network?
The 2500 Mbit/s interface is listed as compatible with 1000 Mbit/s Gigabit Ethernet. Full operation is specified at 60 fps and 2448 × 2048 Mono 8; the configured image rate must remain within the available network bandwidth.
What are the two supported power arrangements for this model?
The camera accepts 9 V DC to 24 V DC and supports PoE. This permits either power through the Ethernet connection or a separate DC feed. Typical consumption is 3.6 W when operated at 12 V DC.
How should C-mount optics be matched to MV-CH050-60NM?
Use a C-mount lens covering the 2/3-inch sensor. Resolution should be appropriate for the 3.45 µm pixel pitch and 2448 × 2048 monochrome image so that the lens does not obscure the edge or defect detail being measured.
Which operating conditions are permitted around the camera?
The specified working interval is -10 °C to 45 °C with 20% to 95% RH and no condensation. Ingress protection is IP40 after correct lens installation and wiring, so the local environment must stay within that enclosure capability.