Area camera · CH Series
Hikrobot MV-CH050-90Y1M-NN
- Lead time
- from 5 days
- Warranty
- 36 months
Monochrome CoaXPress tasks and neighbors
A 164 fps monochrome stream through Micro-BNC CoaXPress defines MV-CH050-90Y1M-NN. Its Gpixel GMAX3405 global-shutter sensor delivers 2448 × 2048 Mono 8 with 3.4 µm pixels on a 2/3-inch format. This operating point addresses rapid edge, registration and surface checks that depend on intensity detail rather than color.
The exposure interval begins at 2 µs and reaches 10 sec, allowing motion freeze under sufficient light as well as longer static capture. PoCXP supports a single coaxial path for image data and power, with 9 V DC to 24 V DC available separately. Trigger and light coordination can use the isolated input, isolated output and bidirectional line on P7.
MV-CH050-90Y1C-NN adds color while retaining 164 fps, GMAX3405 and Micro-BNC CoaXPress. MV-CH050-90TM-C-NF moves the same monochrome resolution to 10 Gigabit Ethernet at 163.4 fps. MV-CH050-60NM provides a lower-rate 60 fps monochrome option over 2.5 Gigabit Ethernet with PoE. Choose this camera for the 164 fps monochrome CoaXPress path.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX3405 |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 164 fps @ Mono8, resolution 2448×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | CoaXPress |
| Sensor technology | CMOS |
| Pixel size | 3.4×3.4 µm |
| Dynamic range | 59.7 dB |
| Signal-to-noise ratio | 39.3 dB |
| Exposure time | 2…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…6.1 dB |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Data interface connector | Micro-BNC |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | PoCXP |
| Power consumption | 3.3 W (typical) @ supply voltage 12 V |
| Cooling | natural cooling |
| Ingress protection | IP40 |
| Working temperature | -10…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % |
| Dimensions | 29×29×42 mm |
| Weight | 90 g (approx.) |
| Certification | CE, RoHS, KC |
| PoCXP support | yes |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
High-rate monochrome edge measurement. Fast contrast-based surface inspection. Triggered registration checks over CoaXPress.
Minimum kit: MV-CH050-90Y1M-NN, a 2/3-inch C-mount lens, a Micro-BNC CoaXPress cable, and either PoCXP or a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH050-90Y1C-NN — Select it when color is needed at the same 164 fps and resolution; MV-CH050-90TM-C-NF — Select it for 163.4 fps monochrome output over 10 Gigabit Ethernet; MV-CH050-60NM — Select it for 60 fps monochrome output over 2.5 Gigabit Ethernet with PoE.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What does the monochrome output provide at the full frame rate?
The camera outputs 2448 × 2048 Mono 8 at up to 164 fps. This format carries intensity information without a Bayer color pattern, matching fast edge, position and contrast-based defect analysis.
How is the CoaXPress cable connected at the camera end?
MV-CH050-90Y1M-NN uses a Micro-BNC CoaXPress interface. The selected coaxial cable must therefore have the matching camera-side connector and connect to a receiving CoaXPress path.
Is a separate power supply mandatory for this camera?
No. PoCXP is supported, so a suitable CoaXPress source can power the camera through the data cable. Separate input from 9 V DC to 24 V DC remains available, with typical consumption of 3.3 W at 12 V DC.
How should a C-mount lens be specified for this model?
The lens must cover the 2/3-inch sensor and resolve the 3.4 µm pitch over 2448 × 2048. The C-mount defines the mechanical connection; scene size and working distance determine focal length.
What environment can the fanless camera operate within?
The camera is listed without a fan or heat sink and operates from -10 °C to 50 °C. Humidity may be 20% to 95% RH without condensation, and IP40 applies after correct lens installation and wiring.