Line scan camera · CL Series
Hikrobot MV-CL084-B1NC
- Lead time
- from 5 days
- Warranty
- 36 months
Networked 8K color inspection in a shorter body
An 8192 × 3 color CMOS sensor and 2.5 Gigabit Ethernet interface position MV-CL084-B1NC as the network-connected long-line color option. Its 7 × 7 µm pixels operate in 1-Line mode. At full resolution, Mono 8/Bayer RG 8 reaches 37.6 kHz, RGB 8/BGR 8 reaches 12.5 kHz, and Mono or Bayer RG 10/12 reaches 18.8 kHz.
For a narrow inspection zone, reducing the region of interest to 2448 pixels or below raises Mono 8/Bayer RG 8 to a 42 kHz peak. This supports wide color web or print inspection at full line length and faster monitoring of a smaller band with the same camera. The 12-pin P10 connector provides four bidirectional configurable I/O lines with single-ended or differential signaling for transport timing.
MV-CL083-91F2C also uses an 8192 × 3 color array with 7 µm pixels but transfers through a 2LC fiber connector at 66.6 kHz. MV-CL083-92CC changes to Camera Link and reaches 33.7 kHz at full width in 80-bit mode. For a shorter networked line, MV-CL044-91NC provides 4096 × 3 over 2.5 Gigabit Ethernet, reaches 75.3 kHz at full width and supports PoE.
Specifications
| Sensor resolution | 8192×3 px |
| Maximum line rate | 37600 Hz @ at full resolution, Mono8/BayerRG8 12500 Hz @ at full resolution, RGB8/BGR8 18800 Hz @ at full resolution, Mono10/Mono12/BayerRG10/BayerRG12 Show all (5)42000 Hz @ in ROI mode, ROI width up to 2448 px42000 Hz @ at full resolution, Mono8/BayerRG8 |
| Line/TDI image mode | single line |
| Color mode | color |
| Lens mount | M72×0.75 |
| Data interface | 2.5GigE (GigE and Fast Ethernet compatible) |
| Sensor technology | CMOS |
| Pixel size | 7×7 µm |
| Dynamic range | 63.9 dB |
| Signal-to-noise ratio | 41.6 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Off, Once, Continuous, trigger width |
| Linear gain factor | 1; 2; 3; 4 |
| Pixel format | RGB8, BGR8, BayerRG8, BayerRG10, BayerRG12, Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line @ external trigger; frame @ external trigger; line, frame @ external trigger, line + frame trigger |
| Flange focal distance | 12 mm |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power delivery | external power supply |
| Power consumption | 8.6 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…55 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…80 % @ non-condensing |
| Dimensions | 76×76×41.9 mm |
| Weight | 350 g (approx.) |
| Certification | CE, RoHS, KC |
| Mounts via adapter | F-mount (via adapter); C-mount (via adapter) |
| Reverse image | not available |
Documents
Selection and applications
8K color inspection over 2.5 GigE. Wide Bayer web scanning. Reduced-width color monitoring.
Minimum kit: Use the MV-CL084-B1NC camera, an M72*0.75 line-scan lens or adapted F-mount/C-mount optic, a 2.5 Gigabit Ethernet cable, and a 12 V DC to 24 V DC supply through the 12-pin P10 connector.
Nearby in the range: MV-CL083-91F2C — Prefer it for 66.6 kHz full-width color transfer through 2LC fiber; MV-CL083-92CC — Prefer it for 8192 × 3 color acquisition with a Camera Link receiver; MV-CL044-91NC — Prefer it for a shorter 4096 × 3 networked line with PoE.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which full-resolution formats are fastest on MV-CL084-B1NC?
Mono 8 and Bayer RG 8 reach 37.6 kHz at the full 8192-pixel width. Mono 10/12 and Bayer RG 10/12 reach 18.8 kHz, while RGB 8 and BGR 8 reach 12.5 kHz, making output format a direct throughput choice.
When can MV-CL084-B1NC reach its 42 kHz peak rate?
The 42 kHz peak applies to Mono 8 or Bayer RG 8 after the region of interest is reduced to 2448 pixels or below. At full 8192-pixel width, those same formats have a listed ceiling of 37.6 kHz.
What lens mount covers the MV-CL084-B1NC 8K sensor?
The camera uses an M72*0.75 interface at a 12 mm flange focal length. F-mount, C-mount and other lens types can be fitted through an adapter ring, with coverage selected for the 8192 × 3 sensor and 7 µm pixels.
How are MV-CL084-B1NC power, data and I/O separated?
Image data uses 2.5 Gigabit Ethernet, compatible with 1000 Mbit/s and 100 Mbit/s links. The 12-pin P10 connector carries 12 V DC to 24 V DC power and four configurable I/O lines. Typical consumption is 8.6 W at 24 V DC.
What installation environment suits the MV-CL084-B1NC body?
The 76 mm × 76 mm × 41.9 mm housing works from -20 °C to 55 °C at 20% RH to 80% RH without condensation. Storage spans -30 °C to 80 °C, and IP40 applies with proper lens installation and wiring.
Why use MV-CL083-91F2C instead of the networked MV-CL084-B1NC?
Both have 8192 × 3 color CMOS arrays and 7 µm pixels. MV-CL083-91F2C transfers through 2LC fiber at 66.6 kHz, while MV-CL084-B1NC uses 2.5 Gigabit Ethernet and reaches 37.6 kHz at full-width Mono 8/Bayer RG 8.