Line scan camera · CL Series
Hikrobot MV-CL083-91F2C
- Lead time
- from 5 days
- Warranty
- 36 months
8K three-row color through dual fiber
Color capture across an 8192 × 3 CMOS array makes MV-CL083-91F2C the long-line color member with a 2LC fiber connector. Its 7 × 7 µm pixels run in 1-Line mode at up to 66.6 kHz. Exposure is adjustable from 3 µs to 10 ms, dynamic range is 63.4 dB and the listed gain is 1.0×.
The camera fits inspection of wide printed or colored material where all 8192 samples must be transported at a steady full-line rate. The 12-pin P10 connector supplies power and exposes four configurable input/output lines, with single-ended or differential signaling for machine timing. At 14 W typical consumption from 24 V DC, power allocation is part of the integration alongside the dual-fiber receiver.
MV-CL083-92CC preserves the 8192 × 3 color geometry but uses Camera Link, reaching 33.7 kHz at full width in 80-bit mode and 66.6 kHz after reducing width to 4140 pixels or below. MV-CL083-B0F2C also uses a 2LC fiber interface and is color, raising the line rate to 71 kHz. MV-CL084-B1NC keeps 8192 × 3 color capture but changes to 2.5 Gigabit Ethernet, with 37.6 kHz in full-resolution Mono 8/Bayer RG 8.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL083-91F2C discontinued | 306302174 | — | |
| MV-CL083-91F2C V2.0 | 306303825 | V2.0 |
Specifications
| Sensor resolution | 8192 px; 8192×3 px |
| Maximum line rate | 66600 Hz |
| Line/TDI image mode | single line |
| Color mode | color |
| Lens mount | M72×0.75 |
| Data interface | XoFLink |
| Sensor technology | CMOS |
| Pixel size | 7×7 µm |
| Dynamic range | 63.4 dB |
| Signal-to-noise ratio | 40.8 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Auto, Off, Once, trigger width |
| Linear gain factor | 1 |
| Pixel format | Mono8, Mono12, RGB8, BGR8 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line, frame, line and frame @ external trigger |
| Flange focal distance | 12 mm |
| Data interface connector | LC 2LC |
| Protocol compatibility | GenICam |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power delivery | external power supply |
| Power consumption | 14 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 5…90 % @ non-condensing |
| Dimensions | 132×76×57.4 mm |
| Weight | 600 g (approx.) |
| Certification | CE, RoHS, KC |
| Mounts via adapter | F-mount (via adapter) |
| Transmission mode | one link, two links |
| Power supply connector | P10 12-pin |
| Reverse image | horizontal |
Documents
Selection and applications
8K color web inspection. Three-row scanning over dual fiber. Wide color acquisition at 66.6 kHz.
Minimum kit: Use the MV-CL083-91F2C, an M72*0.75 line-scan lens or adapted F-mount lens, a 2LC fiber cable and receiver, and a 12 V DC to 24 V DC supply through the 12-pin P10 connector.
Nearby in the range: MV-CL083-92CC — Prefer it for 8192 × 3 color capture over Camera Link; MV-CL083-B0F2C — Prefer it for a 71 kHz 2LC fiber line when digital I/O is unnecessary; MV-CL084-B1NC — Prefer it for 8192 × 3 color acquisition over 2.5 Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What full-width performance does MV-CL083-91F2C provide?
The camera delivers an 8192 × 3 color line at a maximum of 66.6 kHz through its 2LC fiber connector. It uses 1-Line scanning, 7 × 7 µm pixels and an exposure range from 3 µs to 10 ms.
Which lens interface covers the MV-CL083-91F2C 8K line?
An M72*0.75 mount with a 12 mm flange back length is provided. F-mount optics may be attached through an adapter. Lens coverage and resolving performance must match the 8192-pixel line and 7 µm pixel pitch.
How are power and trigger wiring arranged on MV-CL083-91F2C?
A 12-pin P10 connector carries 12 V DC to 24 V DC power and four configurable I/O lines, supporting both single-ended and differential signals. Typical draw is 14 W at 24 V DC, while image data travels on the separate 2LC fiber link.
What protection limits apply around MV-CL083-91F2C?
Operation is rated from -20 °C to 50 °C and 5% RH to 90% RH without condensation; storage spans -30 °C to 80 °C. The housing is IP40 with proper lens installation and wiring and requires protection from liquid exposure.
How does MV-CL083-B0F2C differ from MV-CL083-91F2C?
Both are 8192 × 3 color cameras with 7 µm pixels and a 2LC fiber interface. MV-CL083-B0F2C reaches 71 kHz and has no digital I/O, while MV-CL083-91F2C reaches 66.6 kHz and provides four configurable I/O lines.