Area camera · CS series
Hikrobot MV-CS020-10UM
- Lead time
- from 5 days
- Warranty
- 36 months
Compact 2 MP USB capture with IMX430
USB 3.0 acquisition at 1624 × 1240 and 90 fps is the core of MV-CS020-10UM. The Sony® IMX430 CMOS sensor has a 1/1.7-inch format, 4.5 µm pixels and a global shutter. A 29 mm × 29 mm × 30 mm enclosure packages the 2 MP imaging path for installations beside the host. The combination favors moving-part inspection where added detail over MV-CS016-10UM and a higher USB frame rate are both useful.
Position, outline, presence and small-feature checks can use the dense image while the global shutter keeps moving geometry consistent. The 90 fps ceiling allows repeated observations across a machine cycle. External timing is available through a 6-pin P7 connector with one isolated input, one isolated output and one bidirectional non-isolated line. Power is specified at 9–24 V DC, with consumption of 2.3 W.
MV-CS020-10UC matches the IMX430, 1624 × 1240, USB 3.0, 90 fps and 30 mm body depth, and explicitly states Bayer RG 8 color output plus USB power. MV-CS020-10GM moves the same sensor to Gigabit Ethernet at 60 fps in a 42 mm-deep body. MV-CS020-61UM V5.0 stays with USB and 1624 × 1240, increases speed to 99.6 fps and changes to a Stacked BSI sensor with two operating modes. Select this model for the stated IMX430 USB setup.
Specifications
| Shutter | global |
| Sensor model | Sony® IMX430 |
| Nominal optical sensor format | 1/1.7″ |
| Sensor resolution | 1624×1240 px |
| Maximum frame rate | 90 fps @ Mono8, resolution 1624×1240 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS |
| Pixel size | 4.5×4.5 µm |
| Dynamic range | 71.5 dB |
| Signal-to-noise ratio | 43.7 dB |
| Exposure time | 1…5 µs @ ultra-short exposure mode; 6…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2 |
| Decimation | 1x1, 2x2 |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V @ DC, external power supply |
| Power delivery | external power supply, USB |
| Power consumption | 2.3 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Ingress protection | IP40 |
| Working temperature | -30…60 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 80 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
IMX430 feature inspection at 90 fps. Global-shutter position and outline capture. Compact USB imaging at 2 MP.
Minimum kit: MV-CS020-10UM, a C-mount lens, a USB 3.0 cable, and a 9–24 V DC supply.
Nearby in the range: MV-CS020-10UC — Prefer it when Bayer RG 8 color and USB power are specified; MV-CS020-10GM — Prefer it for an IMX430 Gigabit Ethernet stream at 60 fps; MV-CS020-61UM V5.0 — Prefer it for Stacked BSI capture at 99.6 fps with two operating modes.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What sensor format and sampling does MV-CS020-10UM use?
The Sony® IMX430 has a 1/1.7-inch optical format, 4.5 µm × 4.5 µm pixels and 1624 × 1240 resolution. A C-mount lens must cover that sensor area and map the required scene onto the 2 MP grid.
What is the maximum acquisition rate through USB 3.0?
The stated maximum is 90 fps at 1624 × 1240. USB 3.0 is the primary data interface, with USB 2.0 also supported, and the CMOS sensor uses a global shutter for moving-image geometry.
Which power input is specified for the MV-CS020-10UM camera?
A 9–24 V DC supply is specified, and camera consumption is 2.3 W. The P7 port provides the associated electrical connection together with one isolated input, one isolated output and one bidirectional I/O.
How compact is the housing compared with MV-CS020-10GM?
MV-CS020-10UM measures 29 mm × 29 mm × 30 mm and weighs 80 g. MV-CS020-10GM uses a 29 mm × 29 mm × 42 mm body at 100 g, so the USB camera is 12 mm shallower and 20 g lighter.
What environmental range surrounds the USB installation?
The camera is rated IP40 and operates from –30 °C to 60 °C. Its storage range is –30 °C to 70 °C, with humidity specified from 20% RH to 95% RH. The body weighs 80 g.