Area camera · CS Series
Hikrobot MV-CS020-61UM V5.0
- Lead time
- from 5 days
- Warranty
- 36 months
High-rate mono V5.0 positioning
Mono 8 acquisition at 99.6 fps combines with two operating modes in MV-CS020-61UM V5.0. The 1/1.7-inch Stacked BSI CMOS sensor has 4.5 µm pixels, 1624 × 1240 resolution, a global shutter and 76.1 dB dynamic range. High sensitivity mode begins exposure at 5 µs and permits gain to 24 dB, while high full well capacity begins at 30 µs and limits gain to 12.8 dB. USB 3.0 carries the stream.
The mode pair supports mono edge, position, presence and region-intensity work under different exposure constraints. At 99.6 fps, several observations can be taken across a moving machine sequence, and the global shutter keeps object geometry consistent. USB 3.0 can provide 5 V DC power at typical consumption of 1.5 W; a separate 9–24 V DC input and three I/O lines are available on the P7 connection.
MV-CS020-61UC V5.0 matches the 99.6 fps USB transport and dual modes but outputs Bayer GR 8 color with 75.4 dB dynamic range. MV-CS020-61GM V5.0 retains Mono 8 and 76.1 dB while moving to Gigabit Ethernet with PoE at 60.7 fps. MV-CS020-10UM uses the IMX430 at 90 fps through USB 3.0 without the V5.0 dual-mode ranges. Choose MV-CS020-61UM V5.0 for the high-rate mono Stacked BSI combination in the shallow USB body.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/1.7″ |
| Sensor resolution | 1624×1240 px |
| Maximum frame rate | 99.6 fps @ Mono8, resolution 1624×1240 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS; stacked BSI |
| Pixel size | 4.5×4.5 µm |
| Dynamic range | 76.1 dB |
| Signal-to-noise ratio | 44.8 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V @ DC, external power supply |
| Power delivery | external power supply, USB |
| Power consumption | 1.5 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 80 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Dual-mode mono intensity inspection. Global-shutter capture at 99.6 fps. Compact USB imaging at 2 MP.
Minimum kit: MV-CS020-61UM V5.0, a C-mount lens, and a USB 3.0 cable supplying 5 V DC power, or a separate 9–24 V DC source.
Nearby in the range: MV-CS020-61UC V5.0 — Prefer it for Bayer GR 8 color at the same 99.6 fps rate; MV-CS020-61GM V5.0 — Prefer it for Mono 8 dual-mode capture over Gigabit Ethernet with PoE; MV-CS020-10UM — Prefer it for the Sony® IMX430 at 90 fps through USB 3.0.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which mono format is available from the V5.0 USB model?
The output is 1624 × 1240 Mono 8 at up to 99.6 fps. Its 1/1.7-inch Stacked BSI sensor uses 4.5 µm pixels, a global shutter and a stated dynamic range of 76.1 dB.
How should the two exposure and gain modes be distinguished?
High sensitivity mode spans 5 µs to 10 sec with gain from 0 dB to 24 dB. High full well capacity mode spans 30 µs to 10 sec with gain from 0 dB to 12.8 dB.
What power options accompany the USB 3.0 data path?
USB 3.0 can supply the required 5 V DC camera power, with typical consumption of 1.5 W. The 6-pin P7 connector also accepts 9–24 V DC and provides the external I/O connections.
What changes when selecting the MV-CS020-61GM V5.0 variant?
MV-CS020-61GM V5.0 retains 1624 × 1240 Mono 8, both sensor modes and 76.1 dB dynamic range. It changes the interface to Gigabit Ethernet with PoE, reduces speed to 60.7 fps and uses a 42 mm-deep body.
Which environmental limits apply to MV-CS020-61UM V5.0?
The IP40 camera operates from –30 °C to 60 °C and stores from –30 °C to 80 °C. Its 29 mm × 29 mm × 30 mm C-mount body weighs approximately 80 g, with humidity specified from 20% RH to 95% RH.