Area camera · CS Series
Hikrobot MV-CS050-60GM V2.0
- Lead time
- from 5 days
- Warranty
- 36 months
Mono GigE role in the 5 MP set
Mono 8 output at 2448 × 2048 and 23 fps defines MV-CS050-60GM V2.0. The 2/3-inch Stacked BSI CMOS sensor uses a global shutter, 3.45 µm pixels and a 73.9 dB dynamic range. Gigabit Ethernet carries the image stream, exposure covers 5 µs to 10 sec, and PoE supports a single network connection for data and camera power.
The camera supports grayscale edge, position and dimension checks on moving parts. Its stated full-frame rate is 23 fps at 2448 × 2048 Mono 8. Simultaneous global exposure supports geometry on moving components, while the 5 µs setting allows short capture intervals. A 6-pin P7 connection adds an isolated input for triggers, an isolated output and a bidirectional non-isolated I/O for station-level timing.
MV-CS050-60GC V2.0 changes the image path to Bayer GR 8 color while matching the Stacked BSI sensor, frame size and 23 fps; its typical consumption is 2.5 W at 12 VDC versus 2.3 W for MV-CS050-60GM V2.0. MV-CS050-60GM V5.0 runs at 24.4 fps, reduces typical 12 VDC consumption to 1.4 W and adds high full well capacity and high sensitivity modes. MV-CS050-60UM V2.0 moves the 5 MP mono task to USB3.0 and 60 fps.
Specifications
| Shutter | global |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 23 fps @ Mono8, resolution 2448×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 2.3 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Networked grayscale edge inspection. Moving-part dimension checks. PoE hardware-triggered acquisition.
Minimum kit: Use the MV-CS050-60GM V2.0 camera, a C-mount lens covering 2/3 inch, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC supply.
Nearby in the range: MV-CS050-60GC V2.0 — Choose it for Bayer GR 8 color output at the same 23 fps rate; MV-CS050-60GM V5.0 — Choose it for 24.4 fps mono output and high full well capacity or high sensitivity modes; MV-CS050-60UM V2.0 — Choose it for 2448 × 2048 Mono 8 capture at 60 fps over USB3.0.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What mono format and speed are specified for MV-CS050-60GM V2.0?
It records 2448 × 2048 Mono 8 at up to 23 fps. The Stacked BSI sensor is a 2/3-inch global-shutter CMOS device with 3.45 µm × 3.45 µm pixels and 73.9 dB dynamic range.
What exposure span can MV-CS050-60GM V2.0 apply to the frame?
The available exposure range is 5 µs to 10 sec, with gain from 0 dB to 24 dB. Global shutter operation applies the exposure simultaneously across the full 2448 × 2048 image.
How much power does MV-CS050-60GM V2.0 use on GigE?
Typical consumption is 2.3 W at 12 VDC. The accepted supply range is 9 VDC to 24 VDC, and PoE is supported. Images use Gigabit Ethernet, with Fast Ethernet connection also possible.
What installation environment is listed for MV-CS050-60GM V2.0?
Operation covers -30 °C to 60 °C, storage covers -30 °C to 80 °C, and humidity covers 20% to 95% RH without condensation. IP40 protection applies under correct lens installation and wiring.
How does MV-CS050-60GM V2.0 compare with the USB mono version?
MV-CS050-60GM V2.0 reaches 23 fps over Gigabit Ethernet and supports PoE. MV-CS050-60UM V2.0 reaches 60 fps over USB3.0 and accepts USB3.0 power; both output 2448 × 2048 Mono 8.