Area camera · CS Series
Hikrobot MV-CS060-10GM
- Lead time
- from 5 days
- Warranty
- 36 months
IMX178 replacement path and optics
Sony IMX178 imaging at 3072 × 2048 gives MV-CS060-10GM a 6.3 MP-class frame at 19.1 fps. The 1/1.8-inch CMOS device uses a rolling shutter, and Gigabit Ethernet carries images from the 29 mm × 29 mm × 42 mm camera. C-mount optics and PoE complete a compact network configuration for high-spatial-sampling inspection.
The 3072-pixel width suits small-feature location, fine edge analysis and inspection of stationary or indexed components. Rolling-shutter acquisition favours stationary targets, stopped indexing or strobe-controlled exposure when geometry is measured. The camera accepts 9 VDC to 24 VDC or PoE, operates from -30 °C to 60 °C and carries IP40 ingress protection for an installed system.
MV-CS060-10GM is the documented replacement for MV-CA060-11GM. MV-CS060-10GC-PRO shares the Sony® IMX178, 3072 × 2048 resolution, 19.1 fps and rolling shutter, while explicitly providing color output and exposure from 25 µs to 2.5 sec. MV-CS050-20GM V2.0 reduces resolution to 2592 × 2048 but uses a global-shutter OnSemi XGS5000 and runs at 22.7 fps.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Note | Version | |
|---|---|---|---|---|
| MV-CS060-10GM | 306301399 / 306302903 | 19.1 fps | — | |
| MV-CS060-10GM V5.0 | 306303295 / 306303886 | 19.5 fps | V5.0 |
Specifications
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony IMX178 |
| Sensor format | 1/1.8″ |
| Resolution | 3072 × 2048 px |
| Maximum frame rate | 19.1 fps |
| Data interface | Gigabit Ethernet |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Ingress protection | IP40 |
| Operating temperature | -30 to 60 °C |
| Storage temperature | -30 to 70 °C |
| Humidity | 20% RH to 95% RH |
| Dimensions | 29 × 29 × 42 mm |
| Weight | Approx. 100 g |
| Compatibility | GigE Vision V2.0, GenICam |
Engineering data for this model
Calculated by the MVisionPro engineering tools from the passport data of this model for typical tasks. The figures are estimates for preliminary selection.
Engineering conclusion: 20 mm at 300 mm WD gives a 103.22 mm field, so a 100 mm object fits geometrically. The confirmed mode 3072 × 2048 px · 19.1 fps · Mono8 gives a raw stream of 0.961 Gbit/s over GigE.
Note: Spatial sampling is an engineering estimate; confirm measurement performance by calibration and verify the selected lens installation.
Field of view with a standard lens
| Task | Standard lens | Field of view at the task distance | Distance for the exact field |
|---|---|---|---|
| 100 mm object at 300 mm | 20 mm | 103.22 mm | 291.27 mm |
| 200 mm object at 500 mm | 16 mm | 223.03 mm | 450.03 mm |
Resolution on the object
| Field of view | Sampling density | Object pixel | Minimum defect (5 px) |
|---|---|---|---|
| 103.22 mm | 30.72 px/mm | 32.55 µm/px | 0.1628 mm |
| 223.03 mm | 15.36 px/mm | 65.1 µm/px | 0.3255 mm |
Depth of field and motion
| Field of view | Depth of field | Exposure limit (1 px blur) |
|---|---|---|
| 103.22 mm | 7.59 mm at f/4 | 65.1 µs at 500 mm/s |
| 223.03 mm | 29.3 mm at f/4 | 65.1 µs at 1000 mm/s |
Data stream by interface
| Confirmed mode | Passport condition | Interface | Raw stream per camera |
|---|---|---|---|
| 3072 × 2048 px · 19.1 fps · Mono8 | 19.1 fps @3072 × 2048 | GigE | 0.961 Gbit/s |
Compatible lenses and cables
| Type | Model | What was checked |
|---|---|---|
| Lens | MVL-HF0824M-10MP | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-KF0814M-12MPE | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-KF0818M-12MP | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-KF1228M-12MP | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-KF1628M-12MP | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-KF1628M-12MPE | Mount, sensor coverage and the optical task of the scenario |
| Cable | MV-ACC-01-1101-5m | Data role, interface family, connector path and 5 m length |
| Cable | MV-ACG-RJ45s(up)-RJ45-HF-5m | Data role, interface family, connector path and 5 m length |
| Cable | MV-ACG-RJ45s(up)-RJ45-ST-5m | Data role, interface family, connector path and 5 m length |
| Cable | MV-ACG-RJ45s-RJ45-HF-5m | Data role, interface family, connector path and 5 m length |
How these figures were calculated
- Assumption: Thin-lens approximation; working distance is measured from the principal plane.
- Assumption: The primary optical calculation uses the sensor width and field-of-view width.
- Assumption: The standard focal length is selected downward and its actual field of view is checked.
- Assumption: Object-space resolution is calculated independently for each requested axis.
- Assumption: Motion speed is constant along the selected motion axis.
- Assumption: Depth of field uses a two-pixel circle of confusion.
- Assumption: Stream bandwidth uses the confirmed wire bits per pixel before protocol overhead.
- Assumption: A selected camera is checked only against its passport interface profile.
- Warning: The passport frame rate is tied to the stated mode conditions.
Engineering tools
Configure a kit · Check interface · Calculate optics for this camera
Selection and applications
Fine-edge inspection of indexed parts. Small-feature localisation. Replacement of MV-CA060-11GM installations.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Use the MV-CS060-10GM camera, a C-mount lens such as MVL-KF1628M-12MP or MVL-KF5024M-25MP, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC source.
Nearby in the range: MV-CS060-10GC-PRO — Choose it for explicit color output and a listed 25 µs to 2.5 sec exposure range.; MV-CS050-20GM V2.0 — Choose it for a 2592 × 2048 global-shutter mono image at 22.7 fps.; MV-CS032-10GM — Choose it for a 2048 × 1536 Sony® IMX265 global-shutter frame at 38.1 fps..
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1/1.8" sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.8" sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which earlier camera is MV-CS060-10GM documented to replace?
MV-CS060-10GM is the documented replacement for MV-CA060-11GM. The newer model uses a Sony IMX178 rolling-shutter CMOS sensor, records 3072 × 2048 at 19.1 fps and connects through Gigabit Ethernet.
Which named C-mount lenses are suggested for MV-CS060-10GM?
The listed choices are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Both are C-mount lenses whose image circles cover the camera's 1/1.8-inch sensor; their stated classes are 12 MP and 25 MP.
How do the two suggested MV-CS060-10GM lenses differ?
MVL-KF1628M-12MP has a 17.6 mm image circle and a 12 MP class. MVL-KF5024M-25MP has a 19.3 mm image circle and a 25 MP class. Both cover the 1/1.8-inch, 3072 × 2048 sensor.
What power and network connection does MV-CS060-10GM require?
The camera connects through Gigabit Ethernet and supports PoE, so one Ethernet route can provide data and power. A direct supply from 9 VDC to 24 VDC is also accepted by the camera.
What operating environment is specified for MV-CS060-10GM?
Operation is specified from -30 °C to 60 °C, storage from -30 °C to 70 °C and humidity from 20% RH to 95% RH. The enclosure rating is IP40, and the body weighs approximately 100 g.
How does MV-CS060-10GM compare with MV-CS060-10GC-PRO?
Both models use Sony IMX178 rolling-shutter imaging at 3072 × 2048 and 19.1 fps over Gigabit Ethernet. MV-CS060-10GC-PRO explicitly supplies color and lists 2.4 µm pixels plus 25 µs to 2.5 sec exposure.