Hikrobot MV-CT2CG0120/R

MAX version: what you get

Same sensor, other versions:

Same version, other sensor variant:

Dense colour sampling in context

Small 2 µm pixels and a 4096 × 3024 image give MV-CT2CG0120/R dense colour sampling from a 1/1.56-inch sensor. The 12 MP Stacked BSI CMOS device uses a rolling shutter and reaches 18.4 fps in Bayer BG 8 with lossless compression enabled. C-mount optics and Gigabit Ethernet complete the imaging path in a 42 mm CT2 enclosure.

The camera suits stationary colour surface checks, indexed assembly verification and dense marking inspection where the part can pause. Exposure covers 26 µs to 10 sec, while 2 × 2 and 4 × 4 binning or decimation provide lower-resolution operating choices. PoE may share the network cable, and IP67 applies after correct lens, cap and wiring installation.

MV-CT2CG0120/G changes to a global shutter, 3.45 µm pixels and a 1.1-inch sensor, delivering 4096 × 3000 at 23.9 fps. MV-CT2CG0200/R retains rolling exposure but increases resolution to 5472 × 3648 and rate to 22.3 fps on a 1-inch Sony IMX183. MV-CT1MG0120/R matches 4096 × 3024 and 18.4 fps in monochrome within a smaller 29 mm body.

Documents

Selection and applications

Dense colour inspection of stationary parts. Indexed assembly verification. Rolling-shutter marking capture.

Minimum kit: MV-CT2CG0120/R, a C-mount lens for the 1/1.56-inch sensor, an 8-pin M12 X-Code GigE cable, and PoE or 9–24 V DC power.

Nearby in the range: MV-CT2CG0120/G — Prefer it for global exposure at 4096 × 3000 and 23.9 fps; MV-CT2CG0200/R — Prefer it for rolling-shutter 5472 × 3648 colour at 22.3 fps; MV-CT1MG0120/R — Prefer it for the same 4096 × 3024 rate in monochrome and a 29 mm body.

Compatible lens options

• MVL-KF3524M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.56″ sensor; 25 MP optical class — headroom for this camera
• MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.56″ sensor; 25 MP optical class — headroom for this camera

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

CT: M12 EthernetGigE

I/O & power cables

CT: power and I/O

Power

Power

Optics

Liquid lens

Mounting

Camera mounts

Protection

CT: IP67 covers

All accessory families →

FAQ

Which lenses are listed for the 1/1.56-inch rolling-shutter camera?

MVL-KF3524M-25MP and MVL-KF5024M-25MP are listed. Both are C-mount lenses with 19.3 mm image circles covering the 1/1.56-inch sensor, and both exceed the approximately 12.4 MP, 4096 × 3024 resolution class.

How are power and discrete signals wired on MV-CT2CG0120/R?

The camera accepts PoE or 9–24 V DC and typically uses 1.5 W at 24 V DC under the stated conditions. Its M8 A-Code connector provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O.

What interface conditions support 18.4 fps at 4096 × 3024?

The maximum uses Bayer BG 8 with lossless compression enabled over 1000 Mbit/s Gigabit Ethernet. Data is connected through an 8-pin M12 X-Code port, and the camera can also communicate through a 100 Mbit/s Fast Ethernet link.

Is external Trigger Width exposure available on this rolling model?

Its exposure controls are Off, Once and Continuous, with a 26 µs to 10 sec range. For an externally timed global exposure, MV-CT2CG0120/G supplies Trigger Width and Trigger Controlled functions and captures 4096 × 3000 at 23.9 fps.

What onboard controls can alter the 12 MP colour output?

Binning and decimation both support 1 × 1, 2 × 2 and 4 × 4. Horizontal and vertical reverse output is available, while the pixel formats include Bayer BG through 12Packed, YUV422 variants, RGB 8, BGR 8 and Mono 8.