Frame grabber · CoaXPress
Hikrobot MV-GX1102
- Lead time
- from 5 days
- Warranty
- 36 months
Compact host-link CXP-6 role
Two CXP-6 inputs on a PCI-E gen3 × 4 card define the MV-GX1102 acquisition path. The DIN 1.0/2.3 links accept 1.25, 2.5, 3.125, 5 and 6.25 Gbit/s, with 2 GB DDR4-RAM buffering image traffic. Host transfer is rated at 3400 MB/s maximum and 3350 MB/s sustained, and the supported data formats span Mono and Bayer 8/10/12/16 plus RGB 8.
This two-port arrangement fits a paired-view machine where both cameras feed a single gen3 host slot and external timing reaches the board through configurable I/O. Eleven lines operate as single-ended or differential inputs/outputs; lines 0 through 6 are on the bracket and lines 7 through 10 on the PCB, all spanning 3.3 V DC to 24 V DC. Each coaxial channel can deliver up to 13 W at 24 V DC with PoCXP.
MV-GX1102 matches MV-GX1002 at two cameras and 3350 MB/s sustained transfer, but changes DDR3 to DDR4, PCI-E gen2 × 8 to gen3 × 4, and lowers typical consumption without PoCXP from 13.7 W to 8.8 W. MV-GX1104 doubles the port count and memory to four and 4 GB while retaining the same host bandwidth. MV-GY1002 V2.0 is preferable when the camera side requires CXP-12 and HD-BNC instead of CXP-6 and DIN 1.0/2.3.
Specifications
| Data interface | CoaXPress |
| Board bandwidth | 27200 Mbit/s (max.); 26800 Mbit/s (sustained) |
| Camera connectors | CoaXPress DIN 1.0/2.3 ×2 |
| Host interface | PCIe 3.0 x4 |
| Maximum cameras | 2 |
| Pixel format | Mono8, Mono10, Mono12, Mono16, Bayer8, Bayer10, Bayer12, Bayer16, RGB8 |
| Image buffer | 2000 MB |
| Protocol compatibility | CoaXPress |
| Communication protocol versions | CoaXPress 1.0, CoaXPress 1.1 |
| Client software | MVS |
| Operating systems | Windows 7, Windows 10, Windows 11, Ubuntu 18.04–24.04 (64-bit) |
| Digital I/O lines | 7 bidirectional lines, single-ended, differential, 3.3…24 V, on bracket, lines …Collapse7 bidirectional lines, single-ended, differential, 3.3…24 V, on bracket, lines 0, 1, 2, 3, 4, 5, 6; 4 bidirectional lines, single-ended, differential, 3.3…24 V, on PCB, lines 7, 8, 9, 10 |
| Digital I/O connector | DB15 15-pin male; pin header 9-pin, grid 2×5, 10 holes, pitch 2.54 mm |
| Power consumption | 8.8 W (typical) @ excluding PoCXP output |
| Working temperature | 0…55 °C |
| Storage temperature | -20…70 °C |
| Humidity | 10…95 % @ non-condensing |
| Dimensions | 181×126.3×21.6 mm |
| Certification | RoHS, CE, KC |
| Channel bandwidth | 1250 Mbit/s 2500 Mbit/s 3125 Mbit/s Show all (5)5000 Mbit/s6250 Mbit/s |
| CoaXPress generation | CXP-6; CXP-1, CXP-2, CXP-3, CXP-5, CXP-6 |
| Frame grabber camera supply output power | 13 W (max., per port) @ DC, supply voltage 24 V |
| Frame grabber output voltage | 24 V |
| Memory technology | DDR4 |
| Output power rating basis | per port |
| Streams | 2 |
| Supported SDKs | custom application development |
| Bus indicators | 1 |
| Camera output power delivery | PoCXP |
| Connector bracket | DB15 15-pin male |
| Connector pcb | pin header 9-pin, grid 2×5, 10 holes, pitch 2.54 mm |
| GPIO voltage | 3.3…24 V @ input/output |
| Stream indicator count | 2 |
Documents
Selection and applications
Paired CXP-6 camera capture. DDR4-buffered image transfer. Differentially triggered acquisition.
Minimum kit: Install MV-GX1102 in a PCI-E gen3 × 4 host, attach as many as two CXP-6 cameras through DIN 1.0/2.3 coaxial cables, and keep PoCXP draw within 13 W at 24 V DC on each port.
Nearby in the range: MV-GX1104 — Prefer it when four CXP-6 camera ports and 4 GB DDR4 are required; MV-GX1002 — Prefer it for two ports when the host provides PCI-E gen2 × 8; MV-GY1002 V2.0 — Prefer it for CXP-12 cameras connected through HD-BNC.
FAQ
Which host slot and bandwidth does MV-GX1102 require?
The card uses a PCI-E gen3 × 4 interconnect. Its transfer figures are 3400 MB/s maximum and 3350 MB/s sustained, supported by 2 GB of on-board DDR4-RAM between the CXP inputs and host memory.
What CXP-6 rates are selectable on the MV-GX1102 ports?
Both DIN 1.0/2.3 camera connections support 1.25, 2.5, 3.125, 5 and 6.25 Gbit/s. Up to two cameras can be attached, with each port operating inside the listed CXP-6 rate set.
How is trigger I/O exposed by the MV-GX1102 board?
Eleven configurable lines support single-ended or differential input/output. Lines 0 through 6 are located on the bracket and lines 7 through 10 on the PCB; both groups cover a 3.3 V DC to 24 V DC operating range.
Can MV-GX1102 power cameras through the coaxial cable?
Yes. PoCXP can provide up to 13 W at 24 V DC on each of the two channels. Camera demand must remain inside that per-channel allowance. Typical frame-grabber consumption is 8.8 W when PoCXP load is excluded.
Which Linux releases are included for MV-GX1102 hosting?
The operating-system list covers Ubuntu 18.04 through 24.04 on 64-bit Linux, alongside Windows 7, 10 and 11. MVS client software and an SDK for secondary development complete the stated host software support.
What changes when moving from MV-GX1102 to MV-GX1104?
MV-GX1104 increases the camera interfaces from two to four and the DDR4 buffer from 2 GB to 4 GB. Both boards use PCI-E gen3 × 4, sustain 3350 MB/s and support the same CXP-6 link-rate set.