Vision sensor · SC3000 series
Hikrobot MV-SC3030XM
- Lead time
- from 5 days
- Warranty
- 36 months
Detailed mono work at moderate cadence
Mono global-shutter acquisition at 2048 × 1536 and 40 fps defines MV-SC3030XM as the mid-resolution grayscale member of the SC3000X group. Its 1/1.8-inch CMOS sensor uses 3.45 µm pixels and accepts exposures from 6 µs to 1 sec. The 16 mm optical system uses an M12 mount with mechanical autofocus, and white spot illumination is standard with red, blue or IR point-source alternatives.
Grayscale measurement, OCR, code recognition, object detection, anomaly detection and coordinate conversion can be assembled into detailed inspection sequences. The global shutter and 6 µs minimum exposure support moving-part capture when sufficient light is available. A 12-pin M12 connector combines 24 V DC, three opto-isolated inputs, three opto-isolated outputs and RS-232, while Fast Ethernet provides the data interface.
MV-SC3030XC preserves the 2048 × 1536 grid, 40 fps rate and 3.45 µm pitch but provides color processing. MV-SC3013XM reduces mono resolution to 1216 × 1024 and raises speed to 60 fps with 6.9 µm pixels. MV-SC3050XM keeps mono capture at 40 fps and increases the frame to 2432 × 2048. Choose MV-SC3030XM when the 3.1 MP-class frame balances detail with cadence; step up for more samples or down for more speed.
Specifications
| Sensor resolution | 2048×1536 px |
| Maximum frame rate | 40 fps |
| Working distance | 60 mm 150 mm 300 mm Show all (6)600 mm1000 mm 2000 mm |
| Vision algorithms | Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale …CollapseMeasurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness analysis, L2L angle, diameter measurement, line angle / Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection / Count: Spot count, edge count, contour count, pattern count, learning-based count / Recognition: Multi-object count, code recognition, category recognition, classification registration, object detection registration, OCR, learning OCR, character horizontal stripe detection / Logic: Calculator, If module, logic judge, format output, condition judge, character comparison, combination judge / Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture / Deep learning: DL classification, DL object detection / Defect detection: Anomaly detection / Industry tools: OCR and defect detection |
| Data interface | Fast Ethernet; RS-232 |
| Ingress protection | IP67 @ with waterproof lens cover properly installed |
| Code recognition | yes |
| Sensor technology | CMOS |
| Shutter | global |
| Nominal optical sensor format | 1/1.8″ |
| Pixel size | 3.45×3.45 µm |
| Color mode | mono |
| Exposure time | 6…1000000 µs |
| Gain | 0…15 dB |
| Pixel format | Mono8 |
| Focal length | 16 mm |
| Lens mount | M12 |
| Field of view | 26×20 mm @ working distance 60 mm 66×50 mm @ working distance 150 mm 132×99 mm @ working distance 300 mm Show all (6)265×199 mm @ working distance 600 mm442×331 mm @ working distance 1000 mm 883×662 mm @ working distance 2000 mm |
| Focus mode | auto |
| Lens cap | polarizing cap, diffuser cap, transparent cap |
| Aiming system | LED |
| Integrated light color | white |
| Stored solution count | ≤32 (max.) |
| Protocol compatibility | serial interface, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC, SLMP, FINS, Keyence KV |
| Client software | SCMVS |
| Digital I/O lines | 3 inputs, opto-isolated, lines 0, 1, 2; 3 outputs, opto-isolated, lines 3, 4, 5 |
| Digital input count | 3 |
| Digital output count | 3 |
| Output signal type | opto-isolated |
| Digital I/O connector | M12 12-pin |
| Power supply | 24 V |
| Power consumption | 7 W (average) @ built-in light on, supply voltage 24 V; 22 W (max.) @ built-in light on, supply voltage 24 V |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Shock resistance: acceleration | 30 g |
| Vibration peak to peak amplitude | 1.5 mm |
| Vibration resistance: frequency | 10…55 Hz |
| Dimensions | 80.1×43×44.3 mm (straight configuration); 58.5×43×65.4 mm (right-angle configuration) |
| Weight | 190 g (approx.) |
| Certification | CE, KC |
| Single-pixel accuracy | 0.01 mm/px @ working distance 60 mm 0.03 mm/px @ working distance 150 mm 0.06 mm/px @ working distance 300 mm Show all (6)0.13 mm/px @ working distance 600 mm0.22 mm/px @ working distance 1000 mm 0.43 mm/px @ working distance 2000 mm |
| Top trigger button | yes |
| Aiming emitter count | 1 |
| Integrated light optional color | red, blue, IR |
| OK/NG status indicator | 360° visual indication |
| Port inventory | RS-232 (serial), Ethernet Fast Ethernet (100 Mbit/s) (data) |
| Shock count per direction | 500 |
| Shock pulse duration | 11 ms |
| Shock pulse waveform | half-sine |
| Shock resistance: directions | 6 |
| Solution export | yes |
| Solution import | yes |
| Vibration duration per axis | 2 h |
Documents
Selection and applications
Three-megapixel mono measurement. Grayscale OCR and code checks. Triggered defect inspection.
Minimum kit: To run MV-SC3030XM, combine its 16 mm mechanically autofocused M12 optical path with the selected spot light, a Fast Ethernet cable, a 12-pin M12 I/O lead and 24 V DC power.
Nearby in the range: MV-SC3030XC — Use it when color information is required at 2048 × 1536 and 40 fps; MV-SC3013XM — Choose it for a faster 60 fps mono stream at 1216 × 1024; MV-SC3050XM — Prefer it for 2432 × 2048 mono detail without changing the 40 fps ceiling.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- ID data cablesID Ethernet, M12 8-pinGigE
- I/O & power cables
- ID power, M12 12-pin
- Power
- Power
- Optics
- M12 lenses
- Lighting
- SC lightingID/SC lighting
- Mounting
- Camera mounts
- Protection
- Covers & filters
FAQ
How much mono detail can MV-SC3030XM capture at 40 fps?
The global-shutter CMOS sensor delivers 2048 × 1536 mono images at up to 40 fps. Its 1/1.8-inch format uses 3.45 µm pixels, giving the model a 3.1 MP-class sampling grid for grayscale inspection.
What exposure and gain controls are provided by MV-SC3030XM?
Exposure is adjustable from 6 µs to 1 sec, and gain runs from 0 dB to 15 dB. Those ranges allow the image level and motion exposure to be balanced around the selected spot illumination and target speed.
Which lens configuration is identified for the MV-SC3030XM?
The model lists a 16 mm focal length, an M12 mount and support for mechanical autofocus. White spot light is standard, with red, blue or IR point sources optional, and one aiming LED helps place the image.
Can MV-SC3030XM store multiple inspection projects internally?
Yes. Up to 32 projects can be stored, with import and export supported. The available processing includes OCR, code recognition, measurement, anomaly detection, object detection and coordinate tools for those projects.
For which inspection rates is MV-SC3013XM faster than MV-SC3030XM?
MV-SC3013XM reaches 60 fps, compared with 40 fps for MV-SC3030XM, but its frame is 1216 × 1024 rather than 2048 × 1536. Both are mono global-shutter models; their pixel pitches are 6.9 µm and 3.45 µm respectively.