Area camera · CH Series
Hikrobot MV-CH050-60UC
- Lead time
- from 5 days
- Warranty
- 36 months
USB color capture and model selection
A Stacked BSI sensor and 79 fps full-frame rate give MV-CH050-60UC its place among the USB color cameras. It records 2448 × 2048 Bayer GR 8 through USB 3.0, using a global shutter, 2/3-inch sensor and 3.45 µm pixels. The platform addresses compact color stations where moving items must be separated by appearance as well as geometry.
Color-coded components, printed patterns and packaging can be evaluated while the global shutter holds object shape during motion. LCG exposure begins at 30 µs, whereas HCG begins at 5 µs; both extend to 10 sec. Power may come from USB 3.0 or a 9 V DC to 24 V DC source, and the P7 lines support external trigger timing.
MV-CH050-10UC V4.0 uses an IMX250 sensor and reaches 74.1 fps at the same 2448 × 2048 class. MV-CH050-60NC keeps the Stacked BSI color sensor but moves to 2.5 Gigabit Ethernet and 60 fps with PoE. MV-CH050-90TC-C-NF delivers 163.4 fps through 10 Gigabit Ethernet. Choose MV-CH050-60UC for 79 fps color capture and USB bus power.
Specifications
| Product type | 5 MP USB 3.0 Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 2/3″ |
| Resolution | 2448 × 2048 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 79 fps @ 2448 × 2048 Bayer GR 8 |
| Mono color | Color |
| Dynamic range | 73.9 dB |
| Exposure time | LCG: 30 μs to 10 sec HCG: 5 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports USB 3.0 power supply |
| Power consumption | Typ. 2.2 W @ 5 VDC (USB 3.0 provides power supply) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –10 °C to 50 °C (–14 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.2 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
Color sorting at 79 fps over USB. Short-exposure inspection of moving packaging. Triggered verification of colored assemblies.
Minimum kit: MV-CH050-60UC, a 2/3-inch C-mount lens, a USB 3.0 cable, and either USB 3.0 bus power or a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH050-10UC V4.0 — Use it for IMX250-based color capture at 74.1 fps through USB 3.0.; MV-CH050-60NC — Use it for 60 fps color capture over 2.5 Gigabit Ethernet with PoE.; MV-CH050-90TC-C-NF — Use it when 163.4 fps color output and 10 Gigabit Ethernet are required..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What distinguishes the LCG and HCG exposure ranges here?
LCG exposure is listed from 30 µs to 10 sec, while HCG extends from 5 µs to 10 sec. The shorter HCG limit can address faster motion; the selected gain mode and lighting should be evaluated with the inspection target.
What full-frame output does USB 3.0 carry from this model?
MV-CH050-60UC produces up to 79 fps at 2448 × 2048 in Bayer GR 8. The interface is USB 3.0 and is also listed as compatible with USB 2.0, while full-rate planning should follow the USB 3.0 operating point.
Can the camera be powered without a separate DC cable?
Yes. USB 3.0 power is supported, and typical consumption is 2.2 W at 5 V DC. A separate 9 V DC to 24 V DC input is also available when external machine power is preferred.
What optical coverage is required by the Stacked BSI sensor?
The sensor format is 2/3 inch and the mount is C-mount. Select a lens that covers the sensor and resolves 3.45 µm pixels across 2448 × 2048, with a focal length appropriate to the imaged scene.
What temperature and enclosure limits apply to MV-CH050-60UC?
The operating interval is -10 °C to 50 °C, with 20% to 95% RH and no condensation. IP40 applies with correct lens installation and wiring, defining the degree of ingress protection available at the camera body.