Line scan camera · CL Series
Hikrobot MV-CL082-91F2M
- Lead time
- from 5 days
- Warranty
- 36 months
Dual-fiber 8K mono scanning at 200 kHz
A 200 kHz maximum over a 2LC fiber connector is the defining performance point of MV-CL082-91F2M. Its mono CMOS sensor provides 8192 × 2 resolution with 7 × 7 µm pixels and supports both 1-Line and 2-TDI acquisition. Exposure extends from 3 µs to 10 ms, dynamic range is 63.4 dB and the listed gain is 1.0×.
The long line and high transfer rate suit inspection of wide material moving at a rate that requires dense sampling in both cross-web and travel directions. Four configurable I/O lines on the 12-pin P10 power connection can accept single-ended or differential signaling for synchronization. The camera uses 12 V DC to 24 V DC and draws a typical 14 W at 24 V DC.
MV-CL082-91F1M retains the 8192 × 2 mono array and TDI choice but uses a single LC fiber connector, with 146 kHz in 1-Line and 100 kHz in 2-TDI. MV-CL082-92CM changes the transport to Camera Link and reaches 100 kHz in 80-bit mode. MV-CL084-91F2M keeps the 2LC interface and 200 kHz 1-Line rate, extending the array to 8192 × 4 and adding 4-TDI plus multi-light control.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL082-91F2M discontinued | 306302172 | — | |
| MV-CL082-91F2M V2.0 | 306303818 | V2.0 |
Specifications
| Sensor resolution | 8192×2 px |
| Maximum line rate | 200000 Hz @ 1-line; 100000 Hz @ 2-line TDI |
| Line/TDI image mode | single line, 2-TDI |
| Color mode | mono |
| Lens mount | M72×0.75 |
| Data interface | XoFLink |
| Sensor technology | CMOS |
| Pixel size | 7×7 µm |
| Dynamic range | 63.4 dB |
| Signal-to-noise ratio | 40.8 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Auto, Off, Once, trigger width |
| Linear gain factor | 1 |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line, frame, line and frame @ external trigger |
| Flange focal distance | 12 mm |
| Data interface connector | LC 2LC |
| Protocol compatibility | GenICam |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power consumption | 14 W (typical) @ supply voltage 24 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 5…90 % @ non-condensing |
| Dimensions | 132×76×57.4 mm |
| Weight | 600 g (approx.) |
| Certification | CE, RoHS, KC |
| Mounts via adapter | F-mount (via adapter) |
| Transmission mode | one link, two links |
| Compatible products | MV-GS1002F (optical module not included); MV-AC10G-SFP; MV-AC10G-2LC-2LC-ST |
| Power supply connector | P10 12-pin |
| Reverse image | horizontal |
Documents
Selection and applications
8K mono scanning at 200 kHz. Dual-fiber wide-web inspection. High-density 2-TDI acquisition.
Minimum kit: Combine the MV-CL082-91F2M with an M72*0.75 line-scan lens or adapted F-mount lens, a 2LC fiber cable and receiver, and a 12 V DC to 24 V DC supply through the 12-pin P10 connector.
Nearby in the range: MV-CL082-91F1M — Prefer it for a single LC fiber connection at up to 146 kHz; MV-CL082-92CM — Prefer it for 8192 × 2 mono acquisition through Camera Link; MV-CL084-91F2M — Prefer it for an 8192 × 4 array with 4-TDI and multi-light control.
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What does the 200 kHz rating mean for MV-CL082-91F2M?
The maximum line-rate entry is 200 kHz for this 8192 × 2 mono camera. The sensor supports 1-Line and 2-TDI acquisition, while the image stream uses the stated 2LC fiber connector rather than Camera Link or Ethernet.
Which mount and adapter are used with MV-CL082-91F2M?
The optical thread is M72*0.75 and the flange back length is 12 mm. F-mount lenses can be installed through an adapter. The selected lens must cover the 8192-pixel line and provide resolution suited to 7 µm pixels.
How much power should be allocated for MV-CL082-91F2M?
The camera accepts 12 V DC to 24 V DC and has a typical draw of 14 W at 24 V DC. Power and four configurable I/O lines use the 12-pin P10 connector; the I/O supports single-ended and differential signals.
What are the temperature and sealing limits of MV-CL082-91F2M?
Its working range is -20 °C to 50 °C at 5% RH to 90% RH without condensation, and storage is -30 °C to 80 °C. The enclosure is IP40 with proper lens installation and wiring and is not a liquid-sealed housing.
Why choose MV-CL082-91F2M over the MV-CL082-91F1M fiber variant?
MV-CL082-91F2M raises the maximum line rate to 200 kHz and uses a 2LC fiber connector. MV-CL082-91F1M uses an LC fiber connector and lists 146 kHz in 1-Line and 100 kHz in 2-TDI, with the same 8192 × 2 resolution.