Line scan camera · CL Series
Hikrobot MV-CL084-91F2M
- Lead time
- from 5 days
- Warranty
- 36 months
Multi-light 8K mono capture over fiber
An 8192 × 4 mono CMOS sensor, 2LC fiber transport and multi-light control shape MV-CL084-91F2M. Its 7 × 7 µm pixels support 1-Line, 2-TDI and 4-TDI. With 1 light, the camera reaches 200 kHz in 1-Line, 100 kHz in 2-TDI and 50 kHz in 4-TDI, giving a wide range of speed and row-integration choices on one fiber-linked platform.
The lighting sequencer can also separate surface response under multiple illumination states. At 2 lights it provides 52 kHz in 1-Line or 26 kHz in 2-TDI; 3-light 1-Line reaches 34.6 kHz, and 4-light 1-Line reaches 26 kHz. Four configurable I/O signals on the 12-pin P10 connector support single-ended or differential timing for coordinating the moving material and light sequence.
MV-CL084-91Y2M matches the 8192 × 4 sensor geometry, 7 µm pitch, scan modes and multi-light rate table but sends data through two CXP-10 Micro-BNC connections and supports PoCXP. MV-CL084-91CM uses Camera Link and 5 µm pixels, reaching 100 kHz in 80-bit mode. MV-CL082-91F2M retains the 2LC link and 200 kHz maximum, uses an 8192 × 2 array and supports 1-Line and 2-TDI.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL084-91F2M discontinued | 306302543 | — | |
| MV-CL084-91F2M V2.0 | 306303821 | V2.0 |
Specifications
| Sensor resolution | 8192 px; 8192×4 px |
| Maximum line rate | 200000 Hz @ 1-line, number of lights (multi-light mode) 1 100000 Hz @ 2-line TDI, number of lights (multi-light mode) 1 50000 Hz @ 4-line TDI, number of lights (multi-light mode) 1 Show all (7)52000 Hz @ 1-line, number of lights (multi-light mode) 226000 Hz @ 2-line TDI, number of lights (multi-light mode) 2 34600 Hz @ 1-line, number of lights (multi-light mode) 3 26000 Hz @ 1-line, number of lights (multi-light mode) 4 |
| Line/TDI image mode | single line, 2-TDI, 4-TDI |
| Color mode | mono |
| Lens mount | M72×0.75 |
| Data interface | XoFLink |
| Sensor technology | CMOS |
| Pixel size | 7×7 µm |
| Dynamic range | 63.4 dB |
| Signal-to-noise ratio | 40.8 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Auto, Off, Once, trigger width |
| Linear gain factor | 1 |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line, frame, line and frame @ external trigger |
| Flange focal distance | 12 mm |
| Data interface connector | LC 2LC |
| Protocol compatibility | XoFLink, GenICam |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power delivery | external power supply |
| Power consumption | 15.4 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 5…90 % @ non-condensing |
| Dimensions | 132×76×57.4 mm |
| Weight | 600 g (approx.) |
| Certification | CE, RoHS, KC |
| Mounts via adapter | F-mount (via adapter) |
| Transmission mode | one link, two links |
| Power supply connector | P10 12-pin |
| Reverse image | horizontal |
| Supported multi-light count | 1; 2; 3; 4 |
Documents
Selection and applications
8K multi-light fiber inspection. 4-TDI mono web scanning. Single-light capture at 200 kHz.
Minimum kit: Use the MV-CL084-91F2M camera, an M72*0.75 line-scan lens or adapted F-mount optic, a 2LC fiber cable and receiver, and a 12 V DC to 24 V DC supply through the 12-pin P10 connector.
Nearby in the range: MV-CL084-91Y2M — Prefer it for matching multi-light rates over two CXP-10 interfaces; MV-CL084-91CM — Prefer it for 5 µm pixels and Camera Link transport; MV-CL082-91F2M — Prefer it for a simpler 8192 × 2 fiber sensor at 200 kHz.
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which 1-light rates are available from MV-CL084-91F2M?
With 1-light operation, the camera reaches 200 kHz in 1-Line, 100 kHz in 2-TDI and 50 kHz in 4-TDI. All three modes use the 8192 × 4 mono array and transfer through the 2LC fiber connector.
How fast are the multi-light modes on MV-CL084-91F2M?
At 2 lights the model reaches 52 kHz in 1-Line and 26 kHz in 2-TDI. The 3-light 1-Line maximum is 34.6 kHz, and the 4-light 1-Line maximum is 26 kHz, so the lighting sequence sets the available line rate.
What power and I/O cable is needed for MV-CL084-91F2M?
Use the 12-pin P10 connection for 12 V DC to 24 V DC power and four configurable I/O lines. Typical consumption is 15.4 W at 24 V DC. The timing lines support single-ended or differential signals, separate from 2LC image transfer.
How should optics cover the MV-CL084-91F2M sensor?
The native interface is M72*0.75 with a 12 mm flange back length, and F-mount lenses can be installed through an adapter. Coverage must extend across the 8192-pixel line and resolve the 7 × 7 µm pixels.
What differs between MV-CL084-91F2M and MV-CL084-91Y2M?
Their 8192 × 4 mono arrays, 7 µm pixels, scan modes and multi-light rates match. MV-CL084-91F2M uses a 2LC fiber connector, while MV-CL084-91Y2M uses two CXP-10 Micro-BNC interfaces and supports PoCXP on CXP-0 and CXP-1.