Area camera · CT series
Hikrobot MV-CT1CU0050/G
- Lead time
- from 5 days
- Warranty
- 36 months
PRO version: what you get
Same sensor, other versions:
Same version, other sensor variant:
Color detail, speed and connectivity
An 80 fps color stream at 2448 × 2048 px places MV-CT1CU0050/G in the mid-resolution USB branch. Its 2/3 in Stacked BSI CMOS sensor has 3.45 × 3.45 µm pixels and a global shutter. USB 3.0 uses a Type-C interface and can power the camera, while the short 29 mm × 29 mm × 30 mm body carries an IP67 rating under proper installation.
The 5 MP image suits moving color-surface checks, print verification and component-orientation decisions that require more detail than 2048 × 1536 px. High-sensitivity exposure starts at 5 µs for brief illumination, and the global shutter keeps object geometry coherent. Trigger Width and Trigger Controlled functions synchronize capture; selectable Bayer, YUV422, RGB, BGR and Mono output supports different processing paths.
MV-CT1CU0032/G increases speed to 104.8 fps but records 2048 × 1536 px. MV-CT0MU0050/G matches 2448 × 2048 px and 80 fps in monochrome, using an IP40 enclosure. MV-CT1CG0050/G keeps the color image and IP67 protection while adding Gigabit Ethernet and PoE, but runs at 59.2 fps. Choose MV-CT1CU0050/G for the higher-rate, sealed USB color arrangement.
Specifications
| Shutter | global |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 80 fps @ BayerGR8, resolution 2448×2048 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | USB 3.0, USB 2.0 |
| Sensor technology | CMOS; stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 74.4 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, BayerGR8, BayerGR10, BayerGR10Packed, BayerGR12, BayerGR12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Data interface connector | USB Type-C |
| USB 2.0 compatibility | yes |
| Control interface | not available |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | M8 8-pin A-coded |
| Power supply | 9…24 V |
| Power delivery | external power supply, USB |
| Power consumption | 1.7 W (typical) @ DC, fast heat balance off, USB 3.0, supply voltage 5 V |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 70 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Moving color-surface inspection. High-rate print verification. Sealed USB orientation checks.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Use the camera with a C-mount lens, a USB 3.0 Type-C cable, and power from USB or a 9–24 V DC connection.
Nearby in the range: MV-CT1CU0032/G — Prefer it for 104.8 fps when 2048 × 1536 px is sufficient; MV-CT1CG0050/G — Prefer it for Gigabit Ethernet and PoE at 2448 × 2048 px and 59.2 fps.
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 2/3″ sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 2/3″ sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: USB Type-CUSB 3.0
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
- Protection
- CT: IP67 covers
FAQ
What C-mount lens options are listed for MV-CT1CU0050/G?
MVL-KF1628M-12MP and MVL-KF5024M-25MP are the suggested C-mount lenses. Both image sizes cover the 2/3 in sensor. Their 12 MP and 25 MP classes are above the camera's 2448 × 2048 px output, so each passes the stated format-coverage and resolution-class checks.
How should MV-CT1CU0050/G receive USB data and operating power?
The Type-C connector carries USB 3.0 data and can power the camera at a typical 1.7 W at 5 V DC when fast heat balance is not enabled. USB 2.0 compatibility is included. The 8-pin M8 A-Code connection also accepts 9 V DC to 24 V DC and carries the discrete I/O.
Can MV-CT1CU0050/G inspect moving colored parts at 80 fps?
Its global shutter captures the 2448 × 2048 px frame at one exposure, and Bayer GR 8 reaches 80 fps. High-sensitivity exposure begins at 5 µs. Together with Trigger Width and Trigger Controlled timing, the camera can coordinate short captures with moving-part arrival.
What on-camera data choices does MV-CT1CU0050/G provide?
Binning and decimation each support 1 × 1, 2 × 2 and 4 × 4. Color output includes Bayer GR through 12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB 8 and BGR 8; Mono 8 is also listed. These modes adjust spatial sampling and transfer representation.
Which environmental limits apply to MV-CT1CU0050/G?
IP67 applies when the lens, lens cap and wiring are installed properly. The camera works from –30 °C to 60 °C and at 20% RH to 95% RH without condensation. Its enclosure is 29 mm × 29 mm × 30 mm and its approximate mass is 70 g.