Hikrobot MV-CU013-80GC

Applications and neighbours at 1.3 MP

Global-shutter capture at 1280 × 1024 and 89.9 fps defines MV-CU013-80GC. The 1/2.7-inch CMOS sensor feeds a Gigabit Ethernet interface, giving this model a middle position between the very fast 720 × 540 cameras and higher-resolution CU variants. A C-mount accepts lenses sized for the compact sensor format, and the camera body weighs 100 g.

The simultaneous exposure is suited to moving-component presence, alignment and shape checks where 1280 × 1024 supplies more sampling than 720 × 540. Hardware coordination is available through one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. The 9–24 V DC input supports installation on common machine power rails.

MV-CU013-80GM matches the 1280 × 1024 grid and 89.9 fps rate while explicitly producing Mono output. MV-CU004-10GC trades resolution down to 720 × 540 for 126.5 fps and stated color capture. MV-CU013-A0GC keeps 1280 × 1024, adds stated color, uses a larger 1/2-inch sensor and reaches 91.3 fps. Choose this model for the 1/2.7-inch GigE configuration.

Available versions

One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.

Documents

Selection and applications

Moving-part alignment at 1280 × 1024. Fast presence inspection over Gigabit Ethernet. Sensor-synchronised area capture.

Minimum kit: Start with the camera, a C-mount lens covering 1/2.7 inch, a Gigabit Ethernet cable and a 9–24 V DC power source.

Nearby in the range: MV-CU013-80GM — Select it when the same 1280 × 1024 at 89.9 fps is required with stated Mono output; MV-CU013-A0GC — Select it for stated color output, a 1/2-inch sensor and 91.3 fps at the same resolution; MV-CU004-10GC — Select it when 126.5 fps matters more than the reduction to 720 × 540.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

How much motion can MV-CU013-80GC capture without geometric skew?

Its CMOS sensor uses a global shutter and records 1280 × 1024 at up to 89.9 fps. Simultaneous frame exposure addresses geometric skew from line-by-line readout; actual blur still depends on illumination, target speed and the chosen exposure.

What lens family should be considered for the 1/2.7-inch sensor?

The mechanical interface is C-mount and the sensor format is 1/2.7 inch. A lens should cover that format and provide the required scene coverage and working distance at 1280 × 1024, without relying on an image circle intended for a smaller sensor.

Which network and supply connections does MV-CU013-80GC require?

Image transfer uses Gigabit Ethernet. Camera power is specified as 9–24 V DC, and typical consumption is 2.2 W. The installation therefore needs a Gigabit Ethernet data path and an external supply within that voltage range.

Can the camera be tied to a sensor and actuator at the machine?

Yes. The listed I/O comprises one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. These lines can carry acquisition timing and a result or control signal alongside the Ethernet image connection.

What environmental boundary applies to the MV-CU013-80GC housing?

The camera is specified for operation from 0 °C to 50 °C and carries an IP30 ingress rating. It should therefore be integrated where the stated temperature range is maintained and where the surrounding machine structure provides any required added contamination protection.